Jump to content
SAU Community

M35 Blacked Out Headlights

spoolin12
 Share

Recommended Posts

stagman Community Regular

stagman

Posted
Posted
Plug away but they couldnt help me with a price for a turbo halfcut only the DD, didnt seem interested.

There not the best with prices becuase they dont seem to know what things are worth. I went there and named a price, got my parts.

spoolin12 Collaborator

spoolin12

Posted
  • Author
Posted (edited)

Well whatever you do DONT stuff up your headlights like I did. Called everywhere for a spare and Just Jap want $700 for a single light with a large scratch on the lens. A new one from Nissan is $2583.00 for ONE light....

I will hold out and see if I can find anything cheaper. The light still works and looks OK, I am just fussy.

Here are some iPhone shots.

stagleft.jpg

stagright.jpg

I blacked out the top of the rear lights too.

stagrear.jpg

Edited by spoolin12
Angus Smart Grand Master

Angus Smart

Posted
Posted
I will post up a step by step tutorial when I get a spare light.

Its not that simple, and I managed to ruin my passenger light.

Bro, Call GMS spares in Revesby.. Mavis st..

they bought the banana wreck from brisbane..

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
I called them about the engine, they want $4500, a grand more than they paid for the whole car... I could import a complete straight car from japan for around that.

Not much else usable left on that thing but the engine lol

Edited by iamhe77
Bis-e Bee Mentor

Bis-e Bee

Posted
Posted

... while on the topic of engines. does anyone know out of interest, how much modding would be required to a nissan maxima vq25de to go into the stagea with the added turbo?

just wondering if that is a cheaper option, obviously providing you don't have to replace or upgrade half the motors internals.

zei20l Grand Master

zei20l

Posted
Posted

to hit 1bar of boost i guarantee the pistons are different at the very least, valves would be too i imagine. externally there are plenty also!

the block itself might be the same, but i dont think anyones opened them up yet! no one in australia anyway

scotty nm35 Grand Master

scotty nm35

Posted
Posted

VQ35DE would be a cheaper and better option wouldn't it?

I have heard the stock 3.5 has issues at the power level i'm at now. You would have to do the bearings, rods, pistons and rings at a minimum, with either bottom end, if you were to keep the turbo.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...