Jump to content
SAU Community

Recommended Posts

was wondering if anyone has the dimensions from Hub to Hub and front to rear for the R33 or R32 rear subframe/suspension. from what i gather the GTR and GTST are dimensionally the same so either is fine.

not going to give away too much as to what its for at this stage but if anyone has one removed from a car atm or knows offhand where i could get them etc it would be great

this can be either at full droop/full compression or ride height

Cheers

  • 3 weeks later...

can anyone confirm that R32 GTR and R33 GTST are interchangeable ?

know that GTR rear ends have been used in R34's but if the mount points are the same from R32 GTR and R33 then i can jig around a cheap bare 32 subframe.

  • 2 months later...

The R33 subframe mounting points are offset by 5mm each towards the outside of the car. The anti-squat geometry is modified by lowering the front pickup point of the lower control arm by 15mm or so. (Off the top of my head; haven't measured that bit)

I have a jig for skyline subframes front and rear. It's fairly specific for the chromolly tube subframes I do but your welcome to take basic measurements of it. Mounting locations etc are all factory.

I won't send it anywhere and i don't want the geometry/pick up locations measured though as it has taken me alot of time, experiance and money to get right.

  • 4 weeks later...
  • 3 months later...

these measurements are from the middle of the bolt hole:

r32/s13

width

605mm

1070mm

length

665mm

r33

width

615mm

1085mm

length

655-660mm

i couldn't get the lengths exact with the hoops in the frame getting in the way

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...