Jump to content
SAU Community

Recommended Posts

hey guys,

does anybody know for sure if nissan 4 piston calipers aka r32, r33, s14, s15, 300zx use the same pads as the subaru 4 piston calipers....

trying to find some good pads for a mates wrx... and some places they are listed as the same pad, others they arent...

cheers

Linton

hey guys,

does anybody know for sure if nissan 4 piston calipers aka r32, r33, s14, s15, 300zx use the same pads as the subaru 4 piston calipers....

trying to find some good pads for a mates wrx... and some places they are listed as the same pad, others they arent...

cheers

Linton

Hey Linton

I took my Project Mu brake pads out of my R32 GTR calipers (same as R33 GTST) and put them in my mates WRX no problem at all.

I have also had some pads in mine from a R32 GTST.

Also Mazda RX7 4 pots the same.

They all use the same Sumitomo caliper. They look and mount a bit diffrent but there all the same and all take the same pads.

Hope ive helped :)

Will

i'm sorry, you're right.

From 1968 until 1999, Fuji Heavy Industries was 20% owned by Nissan. After Renault bought Nissan, they sold their share of Fuji to GM.

regardless, parts are shared.

All good man wasn't having a dig at you or anything just wanted to point that out.

Found it really interesting to know that items were shared between Subaru and Nissan. Now days i wouldn't be surprised in Toyota and Subaru share a fair few parts especially since they are making that new FT-86 together.

thanks chaps.. the rear pads are different... scoobs have the normal style 2 piece caliper as opposed to the nissan one piece one... but the fronts are the same.. which makes me wonder why can pads be different prices.. if they are the same pad.

All good man wasn't having a dig at you or anything just wanted to point that out.

Found it really interesting to know that items were shared between Subaru and Nissan. Now days i wouldn't be surprised in Toyota and Subaru share a fair few parts especially since they are making that new FT-86 together.

Didn't Toyota buy GM's share of FHI?

"GM announced on October 6, 2005 that it will sell 8.4% of the company to Toyota and disposed of its remaining share.

On April 10, 2008, Toyota increased its stake in FHI to 16.7% and announced the end of minicar production at its facility in Gunma Prefecture.

Daihatsu, a subsidiary of Toyota, will instead supply the cars to FHI."

I took my Project Mu brake pads out of my R32 GTR calipers (same as R33 GTST) and put them in my mates WRX no problem at all.

I have also had some pads in mine from a R32 GTST.

Also Mazda RX7 4 pots the same.

They all use the same Sumitomo caliper. They look and mount a bit diffrent but there all the same and all take the same pads

Yep, all correct except for the bit about the RX7 4 pot, which is miles smaller than the Sumitomo found on WRX/Skylines, and doesn't use the same pads.

Yep, all correct except for the bit about the RX7 4 pot, which is miles smaller than the Sumitomo found on WRX/Skylines, and doesn't use the same pads.

my bad could of sworn they were the same

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...