Jump to content
SAU Community

Recommended Posts

hey guys,

does anybody know for sure if nissan 4 piston calipers aka r32, r33, s14, s15, 300zx use the same pads as the subaru 4 piston calipers....

trying to find some good pads for a mates wrx... and some places they are listed as the same pad, others they arent...

cheers

Linton

hey guys,

does anybody know for sure if nissan 4 piston calipers aka r32, r33, s14, s15, 300zx use the same pads as the subaru 4 piston calipers....

trying to find some good pads for a mates wrx... and some places they are listed as the same pad, others they arent...

cheers

Linton

Hey Linton

I took my Project Mu brake pads out of my R32 GTR calipers (same as R33 GTST) and put them in my mates WRX no problem at all.

I have also had some pads in mine from a R32 GTST.

Also Mazda RX7 4 pots the same.

They all use the same Sumitomo caliper. They look and mount a bit diffrent but there all the same and all take the same pads.

Hope ive helped :)

Will

i'm sorry, you're right.

From 1968 until 1999, Fuji Heavy Industries was 20% owned by Nissan. After Renault bought Nissan, they sold their share of Fuji to GM.

regardless, parts are shared.

All good man wasn't having a dig at you or anything just wanted to point that out.

Found it really interesting to know that items were shared between Subaru and Nissan. Now days i wouldn't be surprised in Toyota and Subaru share a fair few parts especially since they are making that new FT-86 together.

thanks chaps.. the rear pads are different... scoobs have the normal style 2 piece caliper as opposed to the nissan one piece one... but the fronts are the same.. which makes me wonder why can pads be different prices.. if they are the same pad.

All good man wasn't having a dig at you or anything just wanted to point that out.

Found it really interesting to know that items were shared between Subaru and Nissan. Now days i wouldn't be surprised in Toyota and Subaru share a fair few parts especially since they are making that new FT-86 together.

Didn't Toyota buy GM's share of FHI?

"GM announced on October 6, 2005 that it will sell 8.4% of the company to Toyota and disposed of its remaining share.

On April 10, 2008, Toyota increased its stake in FHI to 16.7% and announced the end of minicar production at its facility in Gunma Prefecture.

Daihatsu, a subsidiary of Toyota, will instead supply the cars to FHI."

I took my Project Mu brake pads out of my R32 GTR calipers (same as R33 GTST) and put them in my mates WRX no problem at all.

I have also had some pads in mine from a R32 GTST.

Also Mazda RX7 4 pots the same.

They all use the same Sumitomo caliper. They look and mount a bit diffrent but there all the same and all take the same pads

Yep, all correct except for the bit about the RX7 4 pot, which is miles smaller than the Sumitomo found on WRX/Skylines, and doesn't use the same pads.

Yep, all correct except for the bit about the RX7 4 pot, which is miles smaller than the Sumitomo found on WRX/Skylines, and doesn't use the same pads.

my bad could of sworn they were the same

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...