Jump to content
SAU Community

Recommended Posts

Interesting that...

the report needed to mention the type of car, repeatedly

the witness didn't inform police when she noticed the aberent behaviour

the police failed to act on the deceased's alledged complant

the police failed to act independently

The deceased knew of the hazard yet took no mitigating action to decrease her exposure

Hoon is now a verb

all in all another well balanced casserole of nonsense

What a dickhead!!!!!! Obviously, he felt inadequate in certain areas and someones else has now payed the price. And he will have to live with this forever.

Knowing that he has killed an innocent person for the sake of five seconds of fun.

Why not just take it to a track or if you don't have the money, at least go somewhere where there is NO ONE AROUND.

The fact is he is just someone who feels like he needs the approval of people and will do anything to do it. Well now he has the complete opposite.

As for inthisglass, mate show some respect. The lady had done nothing wrong and was the innocent one. The dick who was driving was the one at fault and now she's lost her life because of it. How would you have liked it to have been you or worse, your mum, sister, wife, girlfriend, daughter, or someone close to you.

Rest in peace

  • 2 weeks later...

The neighbours in my street think i hoon up and down the road, which i don't 50km/hr max.

The general public has no idea how fast your going and just assume your speeding from the sound of your car.

He may or may not have been hooning, but its a far cry to condemn the guy off that news article.

The neighbours in my street think i hoon up and down the road, which i don't 50km/hr max.

The general public has no idea how fast your going and just assume your speeding from the sound of your car.

He may or may not have been hooning, but its a far cry to condemn the guy off that news article.

+1

Had about 3 people over my Skyline years pretty much jump out on the road and wave for me to slow down in residential areas, when I was more than likely below 50kph.

The neighbours in my street think i hoon up and down the road, which i don't 50km/hr max.

The general public has no idea how fast your going and just assume your speeding from the sound of your car.

He may or may not have been hooning, but its a far cry to condemn the guy off that news article.

I had an old guy run out onto the road and scream "I'll throw a brick through your windscreen if you speed through here again!" .. because my car is too loud? he's obviously too old then! :wacko:



  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...