Jump to content
SAU Community

Recommended Posts

Reason Psymin's car was doing 12s was it was wheelspinning most of the time. I'm sure it could do better with Micky Thompson Drag tyres and maybe a slightly different suspension set up. It was very fast around Pukekohe.

My S1 is lowered on Bilsteins, has heavy sway bars, adjustable camber, pineapples, semi slicks (now slicks) on the track and handles heaps better than stock but was still getting passed by little cars with half my horsepower on the track.

I enjoy having a completely stock looking wagon which will have 300 -400kw by the time I am finished. the only reason

I don't build a track car is I am too poor.

Kiwi:

Stereo is a must for any car of mine, as it stands I have 3 amps, 8 speakers and a 25 kilo sub (not including box). I am about to add 2 more subs. It would be the same for any car I buy, tracked or not and was factored into my thinking already :D

Kiwi:

"It was very fast around Pukekohe." Is Pukekohe a track in NZ? You wouldn't happen to know or have a link to track times? I'll google it :)

Not worried about the money coming back, modifying my car is my number 1 hobby, I'm happy to write it off! Looks like I have some more thinking to do :P

Cheers for all the opinions guys :)

Edited by stageaharts

Pukekohe used to be the main racetrack for Auckland. The Aussie supercars used to have a round there (its at a Hamilton Street circuit at the moment. Sorry I don't have any times - maybe contact Simon direct. There is no doubt that his car is fast by any standards (despite the modest 1/4 mile times) but it cost him megabucks and many hours to build.

  • 2 weeks later...
i've recently discovered how badly a stock C34 Stag (RS Four S) is in the twisties

sure it pulls out of corners quite nicely, but is hard to carry speed into, given the weight of the car (stock suspension didn't help!)

i was following a mate in his Caldina GT-T, and he left me for dead, although he just installed some nice Tein coilovers, whilst mine is stock in every way shape and form

imo, a Stag is not, and will not ever be a "bang for your buck" track/strip car

a unique, comfortable tourer? hells yes

with enough $'s, sure it could be competitive, but "bang for buck" you'll get better results elsewhere

good luck with it :)

The GT-Four N ST246 Caldina is even better again in terms of ability in the tight and twisty stuff. TRD got the suspension set-up sorted nicely, and the Torsen LSD helps too.

How much does a C34 RS Four S weight? The GT-Four N is listed at 1480-1490, but it doesn't feel that heavy at all.

They are rather heavy aren't they? I can see why the overall handling performance is down in comparision to the lighter and almost as powerful ST215. There's a reasonably big difference in power-to-weight ratio between the two, and the ST246. The biggest shame about the ST246 (all versions) is the bland tiptronic auto 'box. But it's acceptable enough for the daily urban grind and the additional suspension and drivetrain tweaks do make the N a hell of a lot of fun when you hit the twisty stuff.

I was in the same boat about 8 months ago...

My Stagea had fmic, 3" exhuast, apexi intake and raised the boost to 11-12psi and was fun for a little while but got over it quickly... Was tossing up spending cash on performance mods for such a large family car or get my misses a Forester and buy myself a toy...

So i sold my S1 C34 Stagea, got the misses a Forester for carting the kids around and brought myself a MA70 Supra with a fully forged motor, T04z 800hp turbo and 5 speed manual and havn't looked back :blink:

They are rather heavy aren't they? I can see why the overall handling performance is down in comparision to the lighter and almost as powerful ST215. There's a reasonably big difference in power-to-weight ratio between the two, and the ST246. The biggest shame about the ST246 (all versions) is the bland tiptronic auto 'box. But it's acceptable enough for the daily urban grind and the additional suspension and drivetrain tweaks do make the N a hell of a lot of fun when you hit the twisty stuff.

if the ST246 was available with a manual box, i'd be all over it like a rash!

mine ran 11.3 at 125mph with 417rwkw (on a 2wd dyno, though drags was done in 4wd), shitty 235 17' street tyres and full weight s1 with twin sunroofs, around the 1800kg+ mark with me in it. Definately had more in it at that power level, i was spinning 1st and start of 2nd. I was up with sports bikes on the street and pretty much unbeatable unless something else had 4wd as well. If you wanna go round corners etc buy a gtr or something, the stagea isnt gonna ever be a decent track car simple as that.

I had spent alot of cash and for one the stock gtr 5 speed wont handle it so i had a dogbox in it, which itself is not cheap at all.

If you want some cheap fun this is the way to go..

r32 gtst, stock rebuilt rb30 with 25 or 26 head, gt3076r or 35r and run 420rwhp or so all day everyday and its cheap as hell, reliable, and will run mid to low 11s easy with stock 5 speed box and they are light and handle well. Pretty bunky daily drivers though, im talking as a track fun car and have another daily driver vehicle to commute in.

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...