Jump to content
SAU Community

Recommended Posts

Please don't apart from lancers trying to look like evo's 318i bmw's have got to be the most wanna be car out there (without even doing anything to the car)

Thanks :)--- but are they any good ?

MINE.

skylinecy.th.jpg

skylineb.th.jpg

skylinea.th.jpg

skylinef.th.jpg

skylined.th.jpg

Edited by BASHO

E36 318iS is a really nice cruiser. I thought you might get bored with it after a GT-T

If it is the E36, they can have a multitude of electrics issues > blowing light bulbs mainly. But they're a pretty stress free engine compared to what's in a 320i which is prone to oil leaks and worn Vanos. 325i coupe is better still - but just check for oil leaks, gear linkages and noisy Vanos (with a wooden dowel).

Edit* sorry I forgot Al that you're not after a manual.

E36 318iS is a really nice cruiser. I thought you might get bored with it after a GT-T

If it is the E36, they can have a multitude of electrics issues > blowing light bulbs mainly. But they're a pretty stress free engine compared to what's in a 320i which is prone to oil leaks and worn Vanos. 325i coupe is better still - but just check for oil leaks, gear linkages and noisy Vanos (with a wooden dowel).

Thanks mate , the one I looked at was an ES 36 (I think) is this the same as a E36 ? it was the sport version and scuse the igoruns but what is a Vanos ? :P

yo u better have a fooking good reason

:P I'm 61 years old and I've got spinal degeneration.

It aint going to get better.

I can always drive but some days just not a manual,

It's a waste.

Think I'm happy about it ?

:mad:

Vanos is a camshaft control thingamy. Like Variable Valve Timing. It was introduced in '93

If it's there, it is located within the front lobe next to the crank pulley on the driver's side.

The E36 series was wonderfully ergonomically suited to the driver, with the dash layout in wrap around style. RX7s and Supras copied the concept. I don't think that the front seats had a lumbar support though - perhaps the optional sports seats did, but I could be wrong.

:mad: Thanks for that , have to sell the Skyline before purchase or do a trade and I'm realy looking for a 4 rather than a 6 , $138K new, fark thats what I call depreciation.

Why so much loss ?

^^^ Referring to the M3 above - That 3.2l engine is a significant improvement over the '97 predecessor.

It has a Double Vanos system and thus greater torque due to having valve timing on both intake and exhaust cams.

Those seats (pictured) are the sports seats referred to above. They give greater support to your back.

The seat squab is extendable too, which is great for support under your legs.

Under mixed condition driving, the 3.2l M3 (well-tuned) only uses about 9.8l/100km - very impressive.

Yep - the 3.2 are sweet. They go like stink too (320hp IIRC). If you're going to get a SMG one, make sure it's been recently rebuilt (not just serviced). Most of them will need a rebuild at this point in their life, and that is mega expensive. that's the reason I'd buy a manual if I ever were to get one.

They sell for as little as $21k for a 97 model, too, even with relatively few km (under 200k)

Interestingly, when a friend was considering a car to replace his R32 GTR about 5 years ago, he looked at an E36 M3 and commented at how fragile it felt compared to the GTR. He later went on to buy an M5 (E34).

Oh, I think that the 3.2 came out late 96. Certainly all the 97 models have it, and I'm pretty sure I've seen several 96 models with the 3.2 as well.

Edited by warps
:( I'm 61 years old and I've got spinal degeneration.

It aint going to get better.

I can always drive but some days just not a manual,

It's a waste.

Think I'm happy about it ?

:)

sorry to hear about this mate :D .

bmw is the way to go, depends on your budget also as audi's are very comfortable and have great seats too. ive been in a e46 m3 and can say those seats are great and have good power :D i was close to getting one but went with the r34 gtr.

good luck in your search.

sorry to hear about this mate :D .

bmw is the way to go, depends on your budget also as audi's are very comfortable and have great seats too. ive been in a e46 m3 and can say those seats are great and have good power :( i was close to getting one but went with the r34 gtr.

good luck in your search.

No bigee just makes me cranky as all get out ,which is scarey cause I've always been a cranky shit to start with.

I'm not looking at the M3's realy rather at the , I think , ES36 which is 318iS 4 potter 1996cc (or roundabouts) donk 2 door, only a littley realy, the RRP on a 99 was about $58k and the yard price now seems to be around $15500 and good ole Redbook putting them at $11.600 private and as low as $6800 wholesale.

I am hoping someone on here may have one and want to do a deal , unlikely, but you never know. :)

No bigee just makes me cranky as all get out ,which is scarey cause I've always been a cranky shit to start with.

I'm not looking at the M3's realy rather at the , I think , ES36 which is 318iS 4 potter 1996cc (or roundabouts) donk 2 door, only a littley realy, the RRP on a 99 was about $58k and the yard price now seems to be around $15500 and good ole Redbook putting them at $11.600 private and as low as $6800 wholesale.

I am hoping someone on here may have one and want to do a deal , unlikely, but you never know. :(

thats fair enough they still look nice in my opinion.

good luck with the search :)

Redbook hates the germans. Don't as me why, but it does and always always undervalues them. GL car hunting :D

Redbook is my friend--and I'm English so-- :)

Just as a thought is the 318iS a timing belt or timing chain don't worry it's just the tensioners jobby.

Anyone know what the Beemer website is called I've googled a bit and keep ending up in the US . ?

Edited by BASHO

i had a e36 318is, but i thought they were all manual? Anyway they are over priced for parts, very unreliable now as most are not looked after, and they have no guts. They do look decent if it's been well kept. They are good till things start to break (and by god they do break)

:) I'm 61 years old and I've got spinal degeneration.

It aint going to get better.

I can always drive but some days just not a manual,

It's a waste.

Think I'm happy about it ?

:P

V35 skylines would be what the doc recommends :P

350GT Premium tiptronic auto.

The driver's seat has many electric adjustments so you can have it just the way you like.

Car isn't overly low so you can get in and out quite easy.

Comfy car with lots of performance.

More gutsy than a 318is, newer and roughly the same price and parts are reasonable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Literally looks like direct port nitrous haha
    • They are in fact just nozzles. They are there only to produce a spray pattern and limit flow. The injector itself is what I use to control flow to the 7x nozzles. My old system had no injector and only PWM the pump. This lead to a lot of inconsistencies, and poor atomization at low pressure when the pump was ramping up. 
×
×
  • Create New...