Jump to content
SAU Community

Recommended Posts

Thinking about selling my RB30/26det, its currently in an R32 gts-t four door and making 465hp at the wheels. I've spent a lot of time and money on this car but I don't get time to use it and I'm not dedicated enough to take it to the track anymore. If I use it on the track I'm spending time and money that would be better spent with my 1.5year old and 1 month old girls. However I absolutely love this car, driving it is like nothing else I've experienced. Engine had a freshen up about a month ago when I pulled it out to put tomei oil pump and head oil drain on.

Would like $20k for the whole lot but I'd like to hear offers too

1989 R32 Gts-t

-RB30 Crank

-Precision Rods

-ARP rod bolts

-ACL race bearings

-ARIAS forged pistons

-Tomei oil pump

-Jun crank collar

-4 layer MLSR steel head gasket (could be wrong about brand cant remember)

-1mm head oil restriction and one blocked off

-std GTR cams

-1inch custom head oil drain

-Head ported by Darren at Lewis Engines

-Modified larger sump with head oil drain and catch can inlets

-T04z turbo

-Trust high mount manifold

-Trust waste gate

-Greddy Y intake

-std GTR plenum, inlet manifold and throttle bodies

-800cc SARD injectors

-Malpasi fuel reg

-GTR engine wiring loom (modified to suit car)

-Power FC D-jetro (maps sensors, GTR plug ecu)

-alloy radiator

-FMIC with 3 inch custom piping

-4 liter custom catch can

-Rear mount battery

-R33 5 speed

-5 puk clutch

-Custom one piece tail shaft

-Kazz 2-way diff

-HSD coil overs

-Shortened front upper control arms

-Adjustable caster rods

-R33 GTR V-Spec front rotors

-Alloy pineapples

-Drift Teks 17x9.5 +15

-Nicely streched rear gaurds

-Hicas lock bar (lines removed)

-Nismo or better fuel pump (cant remember again sorry)

-Nardi stering wheel

-Cobra bucket seats

-Drivers Harness

-Hydrolic handbrake

Probably left a few things out. Also have some spares like 25mm spacers and a few wheels like 16's and 17's although some wont fit over the bigger front brakes. Paints not the best but no rust or damage just not matched properly from where the guards have been done and boot holes fixed. I will try and take new pics if I get around to cleaning it. Only pics I have are from back when I drifted it with the RB20. Haven't drifted the RB30 yet but I might if I find some friends to go to a drift practice with. Car can be registered and has been till early this year however there are some things to be aware of with registering a vehicle with an engine like this.

Thanks people

Link to comment
https://www.sau.com.au/forums/topic/321807-eoi-rb3026det-and-car/
Share on other sites

Forgot Apexi AVC-R boost controller and strut brace front and rear. Also power is at 16psi, if you wanted more power all you need is better fuel lines, fuel rail etc and to turn up the boost. 16psi is minimum boost with this waste gate.

  • 4 weeks later...

Happy to sell engine, turbo, gearbox, tail shaft, wiring and ecu as a package. Will bolt straight into R32 Gts-t and should also fit straight into R33 (Not sure about bonnet height tho)

Engine (full engine with all running gear minus power steering pump and air conditioning)

Turbo (on engine with y intake kit and waste gate)

Gearbox (would leave on engine with 5puk clutch)

Tail shaft

Power FC (with map sensors and hand controller)

GTR engine loom with resistor pack for injectors

All sensors, injectors, coilpacks, head oil drain and turbo lines

$14,000

Depending what car it would be going into I also have modified speedo sender and cross member for the RB25 gearbox, inter cooler + piping and radiator and dump pipe Y to waste gate etc.

Hooked up a battery charger today so I can do a compression test if I get time tomorrow. Took a couple pics, needs a clean, lots of dust from it sitting in storage last few months.

post-16618-1277539915_thumb.jpg

post-16618-1277540033_thumb.jpg

post-16618-1277540136_thumb.jpg

Trying to reply to all PM's but I can only send one every half hour for some reason so sorry if I miss one or you don't get a reply straight away.

Did a cold compression test all were between the 125psi and 130psi marks. Car is running but not registered.

  • 2 weeks later...

I've had no serious offers so I'm going to look at parting it out but keeping car so I can sell it cheap later with a RB25det.

First part up for grabs is the turbo kit $3000 for T04z, manifold, waste gate, Y pipe, all lines and S bend (cast turbo to inter cooler pipe).

I thought the compression test was a little low and I just found out why, there is a rubber o-ring missing where the spark plug thread adapter screws on, without it it screws up to far. Also just been told that I should be doing the test hot with all spark plugs out and throttle open which I wasn't doing before so I'll give it another try this weekend.

http://www.skylinesaustralia.com/forums/Rb...Pe-t327866.html

New thread for parting out.

Power FC not sold, got a bit ahead of myself.

Price change to $12,000 ono for complete engine package

Price change to $17,000 ono for full car

Compression test redone, much better, pics attached aprox 150 over all. Engine was about 50-60degrees so not hot but still warm and throttle was held open unlike last time.

Also found video of last event I did, just small mucking around stuff.

post-16618-1278729687_thumb.jpg

post-16618-1278729837_thumb.jpg

post-16618-1278729912_thumb.jpg

post-16618-1278729984_thumb.jpg

post-16618-1278730066_thumb.jpg

post-16618-1278730133_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...