Jump to content
SAU Community

Recommended Posts

Nissan Skyline R32 GTR 1993 N1 Turbos

27,000km independently confirmed.

The car has the original N1 turbos that are larger and don’t have the typical ceramic turbines that frequently break under improved boost, rather it has steel turbines designed for increased boost.

The car has only ever been owned by two people. I’m over 50 and the only owner since imported, it was previously owned by a 60 year old school teacher in Japan. This means it has never been owned by a young person or miss been treated. I have never increased the boost and believe it was never done in Japan either.

The car was dyno tested when it first arrived in the country and produced 196kW at all four wheels on the standard 7.5psi. This figure is easily over 200kW if tested at the rear wheels. Amounts to around 290kW at the flywheel.

Stunning White.

5 speed manual.

Looks good inside and out. Tiny bump in hood.

This car hasn’t been modified since imported and has hardly been driven.

OS Giken twin plate clutch.

HKS Dump pipes.

HKS Front pipes.

HKS Hi-Power 95mm (3.75inch) hi-flow exhaust.

HKS Hi-Power 120mm (4.72 inch) muffler.

16inch rims.

HKS Pod filters.

Very rare rear lip.

Steering wheel.

CD player.

Stereo system.

Just been taken to two mechanics for check and service before sale.

Peders - Suspension checked, plus:

· Wheel alignment.

· Front rod bush replaced.

Mechanics – Service and check, plus:

· New battery

· New platinum plugs

· Tuned engine bay.

Always garaged and only driven occasionally on weekends.

The car is being sold due to underuse.

I only want to discuss further with serious buyers.

I don’t want to trade as I have other cars already.

Located in South Australia, Western suburbs.

If you reply via online it may take a short time for me to answer as I’m currently rather busy.

Price: $17,500

Contact Person: Samuel 0433 031 312

post-40400-1274768858_thumb.jpg

post-40400-1274768907_thumb.jpg

post-40400-1274768922_thumb.jpg

post-40400-1274768955_thumb.jpg

what does "independently confirmed" mean?

i don't want to take anything away from your sale but i'd bet money on it not being genuine.....

Let the guy sell his car mate, if someone is keen on buying it they can have it checked out for themselves.

Good luck with sale Samuel

No worries guys.

The car and the log books were checked by two Japanese mechanics who could read the log books. They both agreed that the log books were genuine and the odometer was correct.

Thanks

No worries guys.

The car and the log books were checked by two Japanese mechanics who could read the log books. They both agreed that the log books were genuine and the odometer was correct.

Thanks

hey mate, could you pm me an email address so that I can get in contact with you?

can't PM yet because of post count :(

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...