Jump to content
SAU Community

Recommended Posts

Hey Guys, I've seen for sales allowed in the Naturally Aspirated previously so I thought I'll start here to see if there's any interest. If this isn't ok, mods please let me know :)

I've been given a too-good-to-resist price on a new set of JIC Coilovers, unfortunately as usual money isn't my friend.. soooo I'm hoping I can see if anyone is interested in what I have currently:

KYB Shock Absorbers Front and Rear

King Springs (30mm) Front and Rear

Currently on a R34 25GT Sedan (4 Door Love). Both shocks and springs have done approximately 5,000kms in it's N/A Life, and almost 15,000kms in its TurboCharged Life. No track work, daily driven with the occasionaly spirited drive.

My mechanic tells me they're eyelets front and rear, I'm not sure if this is also suitable for R34 25GT Coupe? or other model Skylines? Yours to research.

Hoping that I can get $600 Neg., pick up from Brisbane preferred, but I can post out at buyers cost or come to a deal.

I've had the wheel alignment done this week by Fulcrum after having new tyres fitted, they checked the suspension and didn't find any problems.

If anyone wants the shocks or springs separately, then I'm fine with that, so long as I have a deal to be able to sell them both.

Suspension is still on the car, I'm only planning on upgrading based on a sale and I would need up to a week to have the parts removed first.

Feel free to contact me by PM :P

Cheers, Nathan

No one? Remember price is negotiable :(

I’ve been told that the suspension set up should also be suitable for R33 GTS and R33 GTSt... you’ll need to verify this though.

Thanks Dori :D ps. your not at work today?

Mods, I've posted this up in the FS section now.

Price Drop and new link below:

http://www.skylinesaustralia.com/forums/R3...in-t322908.html

This one can be locked now to avoid confusion :)

Cheers

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...