Jump to content
SAU Community

R34 V-spec Diff Wont Fit My Cradle. Help!

godsmind
 Share

Recommended Posts

godsmind Rising Star

godsmind

Posted
Posted

Hi All

I have a 2001 V spec diff that wanna fit into a R34 cradle, Not only the diff cant fully submerge into the bolting position; but also one side of the half shaft has about 10mm gap between them~!

I have no idea why, Do R34 gtr come with different types of diffs and cradles?! HELP!

:)

godsmind Rising Star

godsmind

Posted
  • Author
Posted

Hum, Not sure if there is suppose to be a spacer for it.

I don't acually have a skyline, I'm trying to fit the cradle into the S15. Brought the GTR cradle, uprights and two shafts which originally belong to a V spec R34. I've brought the V-spec 2 diff back then so I asked him to remove the original v-spec diff out.

After 1 month of gathering parts, I tried to fit the diff in and realised they don't fit. Diff cant fully bolt onto the cradle and one side has 10-15mm gap between the diff and shaft!....:S

Don't know what to do. I suppose I can grind the cradle Bed and make up a spacer for the shaft (I work in a manufacturing factory as process engineer, can get all these parts made easy). But I wonder if they are differences betwen V-spec 1 and V-spec 2.....

godsmind Rising Star

godsmind

Posted
  • Author
Posted

Just for those who might come across the same f*k up I have.

R34 GTR V-spec 2 wont fit V-spec 1 nor Non-vspec cradle. As bridge (front mounting) of Vspec2 cradle is sitting alot higher than others.....

I removed the rear bushes, grind the bridge base.. and the damn diff is still sitting at a different angle.! lol. oh well. might just go mechanical diff. save me hell lot of work/money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...