Jump to content
SAU Community

Recommended Posts

Hi all, im new to the import/car scene and not exactly to mechanically minded but have read some awsome DIY and ect across this forum. I was wondering if it is possible to transplant a RB26DET or ect in a V35 and if so how much ball park to do it?

I have heard i would have to change all the running gear plus transmission? thoughts?

Link to comment
https://www.sau.com.au/forums/topic/322761-transplanting-engine/
Share on other sites

Yeap.

=D Not prehaps as insane as a GTR swap over but gotta keep the DET Love alive. None of this n/a crap..

Cheaper and less trouble to just add a Turbo kit to the VQ engine.

Or buy one that is already done as follows.

SAU For Sale: V35 Twin Turbo

OR

CAR SALES FOR SALE: V35 Twin Turbo 6psi making 229kw at the wheels

:ermm:

Just swap in a VQ25det (if you can find one) or you will have to build the 3.5 internals. There are a few single turbo kits like turbonetics but none I would recommend. I would get custom manifolds made for a GT35 and sit it where the airbox is.

E85 may help the high compression motor last longer with boost, as long as you have a servo selling it near you. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...