Jump to content
SAU Community

Recommended Posts

Motor has to come out to be built anyway.

SIF live with 2 years of a laggy 300rwkw.

Eat $1000 on the turbo change (sell/repurchase). Best $1000 you'll spend really

+1. Laggy crap setups suck. In the grand scheme of thing's $1000 is nothing.

I knew that you would like that.

I'm only doing the essentials basically.

Fuel pump, injectors, PFC, high flow cat, big front pipe.

I think that's it

if you are keeping AFMs might need to upgrade but have seen ppl get around this, dont ask me how hahaha

Big dump pipes would help too :thumbsup:

I heard afms reach their limit around the 300 mark. We'll just see how it goes.

But heard that 33 gtr dumps should be fine. Once again let's find out. Gaha. I'll report back as soon as its all on and tuned. First week of march will be the time.

I heard afms reach their limit around the 300 mark. We'll just see how it goes.

But heard that 33 gtr dumps should be fine. Once again let's find out. Gaha. I'll report back as soon as its all on and tuned. First week of march will be the time.

Looking fwd to the results

  • 1 month later...

My results during today's tuning session, will hopefully get the car tomorrow after a little more tinkering.

But,

312kw at 19psi

303kw at 18psi

287kw at 16psi

Will be posting graph and took some videos as well.

First I want my car back.

But basically the run down is, my cat is being a bitch, 4" 100cell. I have a big front pipe, 2x3" 1x3.5". Stock 33 dumps though. They are most likely causing the most restriction. Also afms are maxing out.

All in all, happy :). I just want to drive it already.

33GTR dumps wont be an issue.

I was making 340rwkw on -9s with ~22psi using R33 dumps.

Upgraded to Tomei dumps when putting on -5s... The only comparative difference was exhaust note.

Cars with stock dumps and -5s made the same power/response as my Tomei equipped set-up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...