Jump to content
SAU Community

How To Prove My Intercooler Is Stock?

Owens
 Share

Recommended Posts

Owens Rising Star

Owens

Posted
Posted

Hello all,

I'm currently trying to get an engineering certificate so my R33 GTR can pass the blueslip for rego.

However, the engineer assesor wants to know if my front mount intercooler is stock, otherwise I have to get an IM240 emissions test from Penrith RTA which I'm not too keen on doing.

To me it looks very stock.

All the mounting points match up perfectly.

No logos/brands can be seen anywhere.

It looks fairly old. i.e. It's discoloured dark/greyish.

No signs of modifications to fit.

I took measurements: W:60cm x H:28cm x D:7cm

However, is there anyway of proving these are the original dimentions? Looked everywhere but need solid evidence that it's original to satisfy the engineer and give the OK.

Any help would be greatly appreicated.

FrangaR33 Mentor

FrangaR33

Posted
Posted
Hello all,

I'm currently trying to get an engineering certificate so my R33 GTR can pass the blueslip for rego.

However, the engineer assesor wants to know if my front mount intercooler is stock, otherwise I have to get an IM240 emissions test from Penrith RTA which I'm not too keen on doing.

To me it looks very stock.

All the mounting points match up perfectly.

No logos/brands can be seen anywhere.

It looks fairly old. i.e. It's discoloured dark/greyish.

No signs of modifications to fit.

I took measurements: W:60cm x H:28cm x D:7cm

However, is there anyway of proving these are the original dimentions? Looked everywhere but need solid evidence that it's original to satisfy the engineer and give the OK.

Any help would be greatly appreicated.

To the best of my knowledge the R33 GTR didnt have a front mount stock, it had a side mount intercooler and I dont think it is that size either. So its probably aftermarket.

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

^^^ R33 GTR have stock front mount intercooler.

You can take measurments of stock FMIC and compare it. Or if you find Nissan part number (usually have U00 in the number if you know what I mean). Width and Height sounds about right, I'm not 100% on thickness though.

RTA is that pain in the arse now?

OT, Didn't you just bought this from Jamie by any chance?

Cheers

Grant

EDIT: Just checked, the thickness is 55mm so 600mm x 280mm x 55mm - this is standard FMIC.

FrangaR33 Mentor

FrangaR33

Posted
Posted (edited)
^^^ R33 GTR have stock front mount intercooler.

You can take measurments of stock FMIC and compare it. Or if you find Nissan part number (usually have U00 in the number if you know what I mean). Width and Height sounds about right, I'm not 100% on thickness though.

RTA is that pain in the arse now?

OT, Didn't you just bought this from Jamie by any chance?

Cheers

Grant

EDIT: Just checked, the thickness is 55mm so 600mm x 280mm x 55mm - this is standard FMIC.

Fail on my part, now I know better :kiss:

Maybe try and see if you can find a brochure or something that shows the front mount in a picture otherwise I dont really know how you can convince someone otherwise, especially considering they already seem to be convinced that its aftermarket.

Edited by FrangaR33
Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted
Fail on my part, now I know better :kiss:

Maybe try and see if you can find a brochure or something that shows the front mount in a picture otherwise I dont really know how you can convince someone otherwise, especially considering they already seem to be convinced that its aftermarket.

And I've measured it after making this post.

So standard FMIC thickness is 55mm.

Cheers

Grant

Owens Rising Star

Owens

Posted
  • Author
Posted (edited)
OT, Didn't you just bought this from Jamie by any chance?

EDIT: Just checked, the thickness is 55mm so 600mm x 280mm x 55mm - this is standard FMIC.

Thanks for confirming that for me. Gives me somthing to work with.

Lol and yes.. I bought it off Jamie. I knew you wanted to sell yours and buy his pretty badly. Sorry you missed out on it buddy. I guess the upside is you already had a GTR where as I didnt at all :)

Definately has a FMIC standard.

What sort of proof is he asking for?

Is telling him it is stock enough for him?

I dont think verbal confirmation is good enough. My engineer is very finicky. And overall he's being very slow with the report like its a walk on the beach. I'm just trying to get sh** moving faster so I can get my car on the road finally rather than depending on him to find out all this stuff for me. It's just killing me with my mew baby sitting in the driveway doing nothing.

Also having no ends of bad luck finding any part numbers remotely close to the FMIC.

Really, if I had a specifications manual pfd or somthing, showing him that would be good enough I'm guessing. Already looked in the engine manual... Nothing in there other than how to service the car obviously.

Thanks for all the quick replies btw.

Edited by Owens
Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted
Thanks for confirming that for me. Gives me somthing to work with.

Lol and yes.. I bought it off Jamie. I knew you wanted to sell yours and buy his pretty badly. Sorry you missed out on it buddy. I guess the upside is you already had a GTR where as I didnt at all :)

Lucky bastard.

No really, this GTR is in really good condition, good enough for me to put mine up for sale.

Well, I don't really have a GTR now - possibly broken turbo now :)

All the best with engineering certificate if all else fails, just buy standard FMIC for $150-250 and slap it on, how come you need a certificate to get it registered?

Cheers

Grant

Owens Rising Star

Owens

Posted
  • Author
Posted (edited)
Lucky bastard.

No really, this GTR is in really good condition, good enough for me to put mine up for sale.

Well, I don't really have a GTR now - possibly broken turbo now :D

All the best with engineering certificate if all else fails, just buy standard FMIC for $150-250 and slap it on, how come you need a certificate to get it registered?

Cheers

Grant

Damn, you know I was seriously thinking of getting your car before I found Jamies. Obvious reasons aside, he seemed to have a good track record of service history, where as your's didnt mention any.

NSW laws... you need an engineering cert to go with the blueslip if you have any mods which the mechanic points out when inspecting the car.

Edited by Owens
Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted
Damn, you know I was seriously thinking of getting your car before I found Jamies. Obvious reasons aside, he seemed to have a good track record of service history, where as your's didnt mention any.

NSW laws... you need an engineering cert to go with the blueslip if you have any mods which the mechanic points out when inspecting the car.

Yeah yours have bona-fide service history which is pretty uncommon on imports. I don't have one and I only seen 2 Skylines out of numerous examples I've looked at for a while with books.

NSW laws do really suck. Here in Victoria, all you have to do is pray that the tester don't know much about EPA.

Quick and easy solution is, get standard FMIC so you don't have to do IM240 emission test - roughly a hour work swapping it.

Owens Rising Star

Owens

Posted
  • Author
Posted

Not really keen on spending much more money on my car since rego is gonna bite me in the ass.

Engineering Cert: ~$500

Blueslip: $80

Rego: $250

Stamp duty: ~$600

Number plates: $35

Already spent $250 on a original intake airbox to replace the air pods so I dont have to get an emissions test. That also applies to the FMIC.

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted
Not really keen on spending much more money on my car since rego is gonna bite me in the ass.

Engineering Cert: ~$500

Blueslip: $80

Rego: $250

Stamp duty: ~$600

Number plates: $35

Already spent $250 on a original intake airbox to replace the air pods so I dont have to get an emissions test. That also applies to the FMIC.

Hehe, that is nothing compared what I'm facing...

I think I'll blow up to $4k to get it back on road (new turbos, gaskets and studs, service kit, PFC + tune while I'm at it...).

They're money pit alright!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • uchoa
      Howdy from the states.

      By uchoa · Posted

      Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • GTSBoy
      Howdy from the states.

      By GTSBoy · Posted

      You'll fit right in. Acceptance is the first step.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 · Posted

      Yeah, all good ...got your postal addy as well ; I'll box the stuff in the next couple of weeks, you can paypal me later..
    • uchoa
      Howdy from the states.

      By uchoa · Posted

      Hello! I had a mid life crisis on a budget and coincided with the R34s being legal in the USA. And now I am here, with it having old car problems and me slowly hoarding parts to start building it to what I envision. Essentially I made a mistake, that lead me to join this forum filled with legends.
×
×
  • Create New...