Jump to content
SAU Community

Stagea Front Sway Bars

QLDR31

By QLDR31,
in Four Door Family & Wagoneers

 Share

Recommended Posts

RSVFOURUK Collaborator

RSVFOURUK

Posted
Posted (edited)
I think my swaybar bushes are stuffed on the front.

Something rattles when I go over bumps.

Does anyone know if R33 GTR have the same ones?

I have fitted whiteline swaybars to both front and rear and used the ones designated to fit a 33GTR

Front ones fit perfectly and the rears fit but the "bend" in the rear sway bar appears to be very close to the mounting to the body and looks like it may damage the bushes. This may be because the rear track on the stagea is wider.

However two years on they are still functioning fine and bushes look exactly as they dd when we fitted them

Car is a series one RS Four

Edited by RSVFOURUK
M I K E Mentor

M I K E

Posted
Posted (edited)

yep. as above.

the front is the same as r33gtr but the stagea rear is about 50mm wider. you can run the rear on stagea but the end links won't be verticle

quick edit: you can also run s14/15 rear sway bar but it will also be too narrow

Edited by M I K E
  • 1 month later...
BensDR30 Experienced

BensDR30

Posted
Posted

Car Torque in SA have had custom rear bars made to suit C34 Stagea RS4 - see my thread for info, but the GT-R bar really doesn't fit properly in the rear (I couldn't make it fit at all - it was too narrow to mount to the body).

M I K E Mentor

M I K E

Posted
Posted

should fit rs4 rear, at least alexcim had a gtr rear swaybar fitted to his old stag. there are pics somewhere on here if you search hard enough showing pics of the swaybar link angles etc and a bit of a discussion about it. don't know what effect it has on performance (if any) though

  • 1 month later...
QLDR31 Community Regular

QLDR31

Posted
  • Author
Posted

I ended up not needing the bushes.

I just had to tighten up one of the links. No more rattles over bumps :P

I could sell the SuperPro D bushes and Nolethane Adjustable links for the Stagea or R33 GTR front sway bar at a discount if anyone wants them ?

Best contact is: [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...