Jump to content
SAU Community

rb25 turbo specs

geraldjohn

By geraldjohn,
in Engines & Forced Induction

 Share

Recommended Posts

druzilla32 Mentor

druzilla32

Posted
Posted
the field controller i have is a unit in which you have to install into the wiring loom,, its a separate unit with adjustments and a digital display that reads your 1/4 ille times, your true speed, your true rpm, your a/f ratio and your tranny shift points (if its auto) and a host of other things,, the unit is marked "field hyper-r boxer series", is this whats on the other end of youe cable?

at the switch end of the cable, when it is on "boxer" an led light comes on from the end of the switch.. the other end of the cable runs into the computer and i dont know where it goes in there.. When i bought the car the previous owner was asian and hard to understand, he said it was something to do with the fuel???

i cant realy notice any difference when it is set on normal or boxer.

geraldjohn Contributor

geraldjohn

Posted
  • Author
Posted
at the switch end of the cable, when it is on "boxer" an led light comes on from the end of the switch.. the other end of the cable runs into the computer and i dont know where it goes in there.. When i bought the car the previous owner was asian and hard to understand, he said it was something to do with the fuel???

i cant realy notice any difference when it is set on normal or boxer.

i wish i could help,, but i have no idea what that cable is,,, if it says field, then maybe its some sort od fuel control device thats plugged into the ecu,, sorry i cant help more

geraldjohn Contributor

geraldjohn

Posted
  • Author
Posted
the stock nissan turbo is neither a T25 or a T3, its nissans own.  

You can get bolt on dump and front pipes from manufacturers such as HKS, that seperate the wastegate and turbine outlet pipes.  fortuneately the nissan outlet is the same as a GT25 turbo, so no probs with compatability if you do go a GT2530 - which would be my first option before a high flow, unless of course you are doing your own?

Something else that wouldnt hurt, a good pod, but make sure you have a partition and CAI.  The partition and CAI are really easy and cheap mods and make a world of difference on and off boost when the days start warming up.

hey thanx steve,,, concerning the pod,, have that already,, has had it for years now, my air filter is behind the front licence plate and thanx again for your info including what the turbo really is, i guess t3/t4 here we come lol

knore Grand Master

knore

Posted
Posted

Ide go 2530 instead of high flowing the standard turbo. It just costs too much.

Hey steve, you say u run with no cat, i wanna do this too, my exhaust at the moment has a cat and 2 mufflers. I wanna get my exhaust done at CES in brisbane because there renowned for awesome quality.

What im asking is, will they do me an exhaust with no cat? seeing as its illegal not to have one?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • GTSBoy
      R33 GTR running -9 with no tune

      By GTSBoy · Posted

      So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...