Jump to content
SAU Community

Recommended Posts

Well I figure its about time I did a little update on the R30 I brought 6months or so back.

Im not posting any photos yet as I want to do a before and after piece.

however I have since getting it done the following..

-stripped and replaced the interior and fitted recaro seats

-added gauges oil,water,volts

-fitted blitz SBC ID 2 boost controller

-facelift front, all but the bonnet

-fitted 17” original goods wheels

-exhaust changed 3’ right through

-new intake and filter

-stripped all sound deadening all 32.3kgs worth!

-fitted genuine mirrors

-fitted R32 brakes (still figuring out the best option for tie rods)

-s13 coilovers front

-r33 coilovers rear

-10mm rear wheel spacers (when you see pics you will understand)

-standard side skirts fitted

-two tone paint

Also on the weekend I did a dyno day just thought id see how she was going..

Now the engine is 2.2ltr has forged pistons a full metal head gasket plus a Vg30 turbo with large intercooler a bosch 650hp fuel pump and a mines computer it has standard injectors..

It made 171.5rwkw@ 14.3 psi but was starting to lean so it could not run higher than that the tuner said with bigger injectors it would easily go way past there saying it felt very strong..

How ever im happy with this power for now it wont put the power to the road until 3rd anyway and am running 235s!

Marc

Link to comment
https://www.sau.com.au/forums/topic/323858-update/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

How big you want the injectors Marc?

I have a NEW set of 570cc Siemens Deka injectors I probably wont be using, but need a 14mm O'ring fuel rail to fit them.

Also 6 x 460cc S2 RX7 and connector plugs to suit that you can have real cheap.

Your stock injectors are 375cc.

"a full metal head gasket"

Your gunna be sooooorrry!

Where is your safety valve, for when you detonate for lean out, or a bad dose of fuel, or whatever?

D.

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5278213
Share on other sites

How big you want the injectors Marc?

I have a NEW set of 570cc Siemens Deka injectors I probably wont be using, but need a 14mm O'ring fuel rail to fit them.

Also 6 x 460cc S2 RX7 and connector plugs to suit that you can have real cheap.

Your stock injectors are 375cc.

"a full metal head gasket"

Your gunna be sooooorrry!

Where is your safety valve, for when you detonate for lean out, or a bad dose of fuel, or whatever?

D.

what who when where? lol gasket was prefitted i didnt put it on the car it seems fine i think ill be fine..

im not sure about injectors at this point ill probably just get 510cc mitsubishi ones but not sure just yet it all depends on if i want to go further with it which at this point i dont.

iv got the car weighing 1073kgs with me in it so that plus 171kw its very quick imo..

as for pics they will come but i want to finish it first so i can do before and after

marc

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5278531
Share on other sites

  • 4 weeks later...

AAAAAH this car!! I know it well...Randy from Nissco (in Halbert St Bayswater) built it with his son Vincent (orig owner a few years back)

They commented that it was one of the only FJ's they had to chain down on the dyno as it kept trying to jump off the rollers! Came on boost VERY hard.

WOW this looks so much better too... what did you use for the lower half paint? details???

I really like the rims, they look like what was going around in 1984. What $$$ you chasing?

Get it finished for the Skyline Nationals too, only a few months to go. September.

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5326988
Share on other sites

thanks guys.

i will have it finished if i can get the TI bumper and a bonnet im chasing come on people help me out here lol

also the wheels are 17" Original goods "Bansai" good tyres 4x114.3 +11 offset from memory

i want 1000 with the tires

the wheels are mint

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5327182
Share on other sites

OK i forgot about the Ti bumper, its out the back still.

I'll pass on the wheels, I dont want anything bigger than 16"

its all good have you got a Ti bumper rear have you? lets do a deal!! cheap please as it will need to make its way to me in melb!.....

its was not an r31 front it was of a prarie or such i think it went in the bin as soon as the car got to me!

Edited by FJ20DR30
Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5327978
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...