Jump to content
SAU Community

Recommended Posts

Well I figure its about time I did a little update on the R30 I brought 6months or so back.

Im not posting any photos yet as I want to do a before and after piece.

however I have since getting it done the following..

-stripped and replaced the interior and fitted recaro seats

-added gauges oil,water,volts

-fitted blitz SBC ID 2 boost controller

-facelift front, all but the bonnet

-fitted 17” original goods wheels

-exhaust changed 3’ right through

-new intake and filter

-stripped all sound deadening all 32.3kgs worth!

-fitted genuine mirrors

-fitted R32 brakes (still figuring out the best option for tie rods)

-s13 coilovers front

-r33 coilovers rear

-10mm rear wheel spacers (when you see pics you will understand)

-standard side skirts fitted

-two tone paint

Also on the weekend I did a dyno day just thought id see how she was going..

Now the engine is 2.2ltr has forged pistons a full metal head gasket plus a Vg30 turbo with large intercooler a bosch 650hp fuel pump and a mines computer it has standard injectors..

It made 171.5rwkw@ 14.3 psi but was starting to lean so it could not run higher than that the tuner said with bigger injectors it would easily go way past there saying it felt very strong..

How ever im happy with this power for now it wont put the power to the road until 3rd anyway and am running 235s!

Marc

Link to comment
https://www.sau.com.au/forums/topic/323858-update/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

How big you want the injectors Marc?

I have a NEW set of 570cc Siemens Deka injectors I probably wont be using, but need a 14mm O'ring fuel rail to fit them.

Also 6 x 460cc S2 RX7 and connector plugs to suit that you can have real cheap.

Your stock injectors are 375cc.

"a full metal head gasket"

Your gunna be sooooorrry!

Where is your safety valve, for when you detonate for lean out, or a bad dose of fuel, or whatever?

D.

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5278213
Share on other sites

How big you want the injectors Marc?

I have a NEW set of 570cc Siemens Deka injectors I probably wont be using, but need a 14mm O'ring fuel rail to fit them.

Also 6 x 460cc S2 RX7 and connector plugs to suit that you can have real cheap.

Your stock injectors are 375cc.

"a full metal head gasket"

Your gunna be sooooorrry!

Where is your safety valve, for when you detonate for lean out, or a bad dose of fuel, or whatever?

D.

what who when where? lol gasket was prefitted i didnt put it on the car it seems fine i think ill be fine..

im not sure about injectors at this point ill probably just get 510cc mitsubishi ones but not sure just yet it all depends on if i want to go further with it which at this point i dont.

iv got the car weighing 1073kgs with me in it so that plus 171kw its very quick imo..

as for pics they will come but i want to finish it first so i can do before and after

marc

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5278531
Share on other sites

  • 4 weeks later...

AAAAAH this car!! I know it well...Randy from Nissco (in Halbert St Bayswater) built it with his son Vincent (orig owner a few years back)

They commented that it was one of the only FJ's they had to chain down on the dyno as it kept trying to jump off the rollers! Came on boost VERY hard.

WOW this looks so much better too... what did you use for the lower half paint? details???

I really like the rims, they look like what was going around in 1984. What $$$ you chasing?

Get it finished for the Skyline Nationals too, only a few months to go. September.

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5326988
Share on other sites

thanks guys.

i will have it finished if i can get the TI bumper and a bonnet im chasing come on people help me out here lol

also the wheels are 17" Original goods "Bansai" good tyres 4x114.3 +11 offset from memory

i want 1000 with the tires

the wheels are mint

Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5327182
Share on other sites

OK i forgot about the Ti bumper, its out the back still.

I'll pass on the wheels, I dont want anything bigger than 16"

its all good have you got a Ti bumper rear have you? lets do a deal!! cheap please as it will need to make its way to me in melb!.....

its was not an r31 front it was of a prarie or such i think it went in the bin as soon as the car got to me!

Edited by FJ20DR30
Link to comment
https://www.sau.com.au/forums/topic/323858-update/#findComment-5327978
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...