Jump to content
SAU Community

Recommended Posts

On the other hand, I don't want a stupid influx of 15 year old pollution-making machines (which many are)...

They cite that their main concern if the sheer numbers, and environmental impact as the two reasons for the need to change the rules...

Easy now... honestly HOW many poor imports do you see come into the country compared to the sheer amount of crap that is on Oz roads these days???

Imports usually are better kept, as Meggala said, and would agree with that.

I very rarely see a decent condition Aust car in proportion to how many there are around compared to imports.

That's just my view, i've seen many 15+ cars come in, and they have all been kept better than any Oz example.

And they go harder, and are built far better than the Oz Versions, or other comparable models.

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Easy now... honestly HOW many poor imports do you see come into the country compared to the sheer amount of crap that is on Oz roads these days???

Imports usually are better kept, as Meggala said, and would agree with that.

I very rarely see a decent condition Aust car in proportion to how many there are around compared to imports.

That's just my view, i've seen many 15+ cars come in, and they have all been kept better than any Oz example.

And they go harder, and are built far better than the Oz Versions, or other comparable models.

That might very well be true, and since we already have so many old and decrepit cars polluting our environment and making our roads unsafe, do we really need more, albeit at a slightly lesser level?

I can't see them passing any legislation that sees all 15 year old domestically sold cars being scrapped, but this is one thing that they can do to reduce the number of older cars on our roads.

should be interesting to see what happens I feel there is a place for the 15 year rule as it stands . one main reason is the fact that the japanese cars have less milage and more frequent serious inspection than australian cars of the same era.

cheers

meggala your idea is good i like it :)

Why don't they have a compliancing plate style system (minus the harsh SEVS/RAWS compliancing) for 15 year old imports and only allow so many "compliance plates" per year - thus limiting the amount of 15yr imports. Either that, or they've got to cut a little more slack in the SEVS/RAWS scheme as it's getting difficult to import cars.

d0p3y that is not a bad idea either :)

i say leave the 15yrs rule as it is, like not everyone can afford a later model car and i would like to be able to get another passage if something happened to mine and yeh there is alot of crap of local offerings of second hand cars and alot of jap cars are better build quality and condition than local offerings.

I guess it comes down to whether you think old cars are pieces of junk and should be off our roads, or whether you believe that new cars are a waste of money and don't have anything an old car does anyhow. So that comes down to the crux of it.

Really it is the governments *own* fault for coming in with regulations as restrictive as SEVS, I mean of course people are going to still want to bring the highly modified cars and therefore the massive jump in numbers. What did they think was going to happen?

To me though, I'm not really too fussed. If they bring it in 2005, that leaves plenty of time for myself and others who might be considering 15 year cars to bring in a car or two. The demand unfortunately could be a little high - and I can already see the dealers trying to stock up with as many 15 year cars as possible (if they think they are going to be popular sellers), just like under SEVS.

It also makes the next year a bit of a pain in the ass, and Japan tries to offload a bunch of stuffed cars (amongst a few good ones) to australia, as they know it might be the last opportunity to.

As for people protecting the "value" of their current cars I think that is a little narrow minded, but of course people are always wanting to look after themselves now aren't they? :)

people with cars that just had their 15th birthday are for the 15 year rule being scrapped!

people wishing to purchase 15 year old cars are against!

whos side are you on hehe ;)

people with cars that just had their 15th birthday are for the 15 year rule being scrapped!

people wishing to purchase 15 year old cars are against!

whos side are you on hehe ;)

i said that because it sux how DOTARS are changing the laws for importing cars into aus

To an upside for every1 (if 15 rule stays, which probably wont b exactly the same) who has a 15 yr old car, At least u can get cheap parts for your car.(Due to the sheer amount that will come in and the ratio of wrecked cars will increase of these models) Or even beter, now u can buy the exact same for a daily driver, and keep one nice for the weekends.

I must say one thing. PPL are sending emails to DOTARS abusing them and telling them that they are fu*ked in the head for wanting to change the laws in the first place and this and that. But what is that going to do?? Its only going to make it worse for us. The ppl who are going to buy the cars.

Personaly I belive they have made up their own minds already and it will be down to 30 years. But then againe the amount of 15 year old cars comming is about 3 times the amount that all the RAWS put together can import.

This is my veiw on this topic. It sux that the GOV have done what they already have done with the SEVS but we are the public we are not important to anyone that sits in a chair all day.

You want to stop the change - bring a vaild case to DOTARS. Its got to satisfy them as well as you.

On the one hand, the car importing industry is slowing down - but theres a heap of cars here - so Im happy enough :)

C'mon, you can't scrap all 15yr old cars based on age. I'm sure you'll find some immaculatly kept / restored old machines (even aussie!) that are in far better condition than mid 90's family cars getting around. I think the problem with our cars is simply how easy it is to get a pink slip, and how many dodgy 'mechanics' are out there who just pass them. A simple rule - if it's bent, rusty, worn, smokey, rattly, etc it must be fixed to factory standard otherwise it doesn't pass. Sorry to say, but if someone can't afford their car to be repaired / replaced for rust, then they can't afford a car no matter the reason they need one.

After all, what about the guys who have old toranas, monaros, etc who keep them so squeaky clean that they're in better condition than they day the left the factory? Age isn't the only factor for a cars condition and there's a lot of motoring history out there that deserve to be on the road more than a cheap 89 GTR that some P plater kid bought to thrash (and kill himself in).

That said, I agree with everyone who says it's the governments own stupid fault for the situation ending up as it has. It's just a knee-jerk reaction due to their lack of foresight of the consequences of sucking the d|cks of the local car industry. One day one of this countries leaders will wake up and see the big picture as a whole, and Australia will become a better place. Of course hell will promptly freeze over :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...