Jump to content
SAU Community

Recommended Posts

Hey guys just wanted to know.... if i a buy a tow-truck(towing cars)what would be the things i need?

Do i need a Medium or Heavy Rigid license?

Do i need any speicial licence if i wanted to start as my own business?

cheers, if anyone here has any tow-truck experience let me know cheers, i want to get into the industry...

Geraus.

Edited by geraus
Link to comment
https://www.sau.com.au/forums/topic/324406-thinking-of-buying-a-tow-truck/
Share on other sites

Research the industry. Make sure it's something you really want to do.

I've known a few towies and it certainly takes specific types. It's a pretty shitful job.

If you do decide it's for you, then the license required will depend on the tow truck you want.

If you are doing heavy towing then I think you will need an MC license. You can drive the trucks on a HR license but once you have something on tow you need an MC.

If you just wanna do cars with a tray truck, you will only require an MR license.

Gimps idea is a very good one. Try and land a job with a tow company and see how you go.

i was actually discussing this with my old man few weeks back. i think it operates the same way as a taxi licence (ie. big money up front)

http://www.vicroads.vic.gov.au/Home/Morein...uckLicences.htm

Well i spoke to vic-roads , all i need is a light regid licence, but im going to go for my heavy just incase for the future. The tow truck is under 6tone, it can tow cars as well but not at accident scenes. im going to be using this tow car to transport cars to mechanics etc. Cheers for the help guys, and if i get this truck i will be more than happy to help SAU out with towing cars :/

We asked the second last towie I used (my car gets towed a lot...lol), the normal tray-back Nationwide tow truck he had only required a Medium Rigid license to drive however get the Heavy Rigid if you're going for your license so you're covered to drive a bit larger than that.

http://www.vicroads.vic.gov.au/Home/Licenc...ecategories.htm

there is an SAU member who runs a tow business. Jack aKa JAGR33 http://www.skylinesaustralia.com/forums/JAGR33-m1569.html

im sure if you send im a pm he can give you allt he info needed.

Research the industry. Make sure it's something you really want to do.

I've known a few towies and it certainly takes specific types. It's a pretty shitful job.

If you do decide it's for you, then the license required will depend on the tow truck you want.

If you are doing heavy towing then I think you will need an MC license. You can drive the trucks on a HR license but once you have something on tow you need an MC.

If you just wanna do cars with a tray truck, you will only require an MR license.

Gimps idea is a very good one. Try and land a job with a tow company and see how you go.

MC = multi combination = B double, gotta have a rigid license for 12 months then get a HC = heavy combination = semi then you can get an MC license, defenately more than he needs.

Well i spoke to vic-roads , all i need is a light regid licence, but im going to go for my heavy just incase for the future. The tow truck is under 6tone, it can tow cars as well but not at accident scenes. im going to be using this tow car to transport cars to mechanics etc. Cheers for the help guys, and if i get this truck i will be more than happy to help SAU out with towing cars :banana:

Another vic roads nufty that does not know what his talking about, no such thing as a light rigid license, there is only an MR = medium rigid = single axle at the back and HR = heavy rigid = twin axle at the back, with the HR you can get one with the conditions of auto, synchro and non synchro gearbox, non synchro is a lot harder and i have only ever seen 1 rigid with a non synchro box.

An from what i know of a tow truck license there are two types, the hardest one to get is one where you see TOWxxx on the trucks number plates, these are able to attend accidents and tow damaged cars, the other is just a normal rigid license but you are not allowed to tow from accidents, purely car transport.

And if you want to add a tow bar and tow a trailer as well then you can do that on a MR or HR as long as the gross of the trailer is 9 ton or less, over 9 ton and you need a HC.

My brother just did his Heavy Rigid license in a crash box (non-synchro), was telling me all about it. Sounds ridiculously difficult. Passed with flying colours and he'd never driven one before.

Its all about timing, matching road speed and revs to the gear your changing into, makes me laugh to see a couple of people on here saying that its easy cos they double clutch there synchro box with out a problem, not so easy in a non syncho where you only have a few hundred rpm to get everything right or your screwed.

MC = multi combination = B double, gotta have a rigid license for 12 months then get a HC = heavy combination = semi then you can get an MC license, defenately more than he needs.

My bad, I meant HC.

yes there is...? pretty much minibus specific though, no trucks as such (so i'm lead to believe)

well there ya go, they have changed shit again, looks like its basically the same as an MR but less weight and you cant tow a trailer, also now you have to have had a car license for 2yrs before you can get an HR license.

http://www.vicroads.vic.gov.au/Home/Licenc...ecategories.htm

Yeh , the tow truck i found i want to buy is a small banna back one. Still doing my research.. thanks for info guys.

Think twice about the Banana back.

lowered cars are very hard to put on them.

Spend a bit more money and get a tilt tray you would be better off.

Also look in to repo companys for work..

Thanks for the advice guys, i looked at this truck today it was pretty clean, took it for a drive and all runs good,looked at the motor and all as well. the ramps are really as well. Think i might try and get this truck! hmm what do you guys reckon? Tilt tray is to much for me, im gona start of small then try and get a tilt tray

img0673rv.th.jpg

Uploaded with ImageShack.us

img0672o.th.jpg

Uploaded with ImageShack.us

lol@ the company name.

We have one of these isuzu's (or one that looks pretty the same) at work, it had lots of problems with snapping exhaust manifold and turbo studs, even after everything was pulled off and decked, dont know if ours was a lemon or its a common problem, it now sits in a paddock.

I see it already has a tow ball so you can add a tandem and carry 2 cars at once, the point about low cars is a good one but im your you could use another set of ramps to flatten the incline a little.

Do you already have a connection in the industry to get work through, that would be the biggest decider, if the works there then why not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...