Jump to content
SAU Community

Recommended Posts

speedo won't work as i'm pretty sure the r32 speedo is cable driven while the later models are electronic. could probably overcome this by using the r34 gearbox, but will then have issues with the fact that the r34 sends the signal through the ecu and the r32 does it differently.

not sure about tacho

People forget one thing about the RB20.

Wind up the boost + basic mods till something goes pop and then jst drop another one in.

Their pretty cheap these days

so are rb25s and they last longer

NA section always provides a good lol :/:)

Edited by 32_Dave
I beleive that it isn't legal to put a motor from an older car into a newer one??

not certain though.

Certainly isn't allowed in SA; Not sure about other states tho ... I'd be contacting appropriate transport authorities and checking - but I'd doubt it'd be allowed (given ADRs, emissions, etc)

only difference is that to then go faster the rb20 is easier to extract more power out of. but that said, i'd go a rb25 because they will put out with the very basic mods (exhaust, cooler and a bit more boost) than what an rb20 will with more mods.

There was someone on this forum with an orange R34 4 Door with an SR20DET. The idea was that the SR20's could pull a lot of power with a smaller (2litre) engine which also reduced the weight and improved weight distribution.

I'm not sure how this compares to an RB20DET? One thing for sure is that you'll save on injectors, sparks, coilpacks etc.. with there only being 4 instead of 6.

If you were going to go to the effort of an engine swap, at leaste do it once do it right and put a larger displacement RB25 engine in, or why not turbocharge the RB25DE NEO?

Thanks all for the input :) running on rb20de neo is really a pain in the arse ... underpower! was thinking of TC it but have thought of throwing in a rb20det from a r32 will be much easy. seems like it not a great idea comparing to TC my rb20de neo. i am looking for those bolt-on kit for my r34 now but was advised to get parts from r33 will be cheaper ...

Thanks all for the input :) running on rb20de neo is really a pain in the arse ... underpower! was thinking of TC it but have thought of throwing in a rb20det from a r32 will be much easy. seems like it not a great idea comparing to TC my rb20de neo. i am looking for those bolt-on kit for my r34 now but was advised to get parts from r33 will be cheaper ...

Dude all i can say is research research research... I researched for over a year about what my better options were, and only now am i going through with the engine swap in my car, basically turning it into a GTT. It is one hell of a pain in the ass, easiest option by far would be to sell and buy a GTT. Reasons I didnt do that are because the body of my car is in very good condition, and i have spent over $10000 in upgrading the brakes, suspension, body kit, paint, everything. So really the only thing i was missing was the GTT engine, gearbox and drivetrain; decided that if i was to start again and buy a stock GTT, i would be back to square one, where the only thing i liked about the car would be the engine, etc. and i would have to spend money everywhere else again. Also I am just very attached to my car :D

There is a thread on here about how to turbocharge your NA, have a read of that and also speak to N-DAWG and 666Dan as they have been through it themselves and gave me some good advice about it.

Before you go looking for more power though, have you upgraded your brakes and suspension? Because if you stinge on those things, your power upgrade will not be very much fun at all...

My 2c

If you mod your car it'll probably be illegal and even if it isn't, you can still be defected for it and engineer's can still be reluctant to put their name on it (especially if the owner is clever enough to 'opt' for an RB20). I believe there's actually some legal problem with putting a smaller engine into a car too (at least in the sensible state of Vic).

I have been told by guys who've swapped RB20s into Silvias that it's the worst decision they ever made and when their budgets get back up to strength they usually reverse the swap or sell and buy another. A Silvia for sale with an RB20 is like a girl with the Jack. SR20s are capable of much more power, much more durable, better on fuel if that's on your list and more reliable.

But, you've got an R34, there's a reason Nissan dropped the RB20 when they thought of the RB25; and all your engine mounting points, gearbox mounts, driveline, aircon, other electrics etc. I would assume would mostly match up with an RB25DET. I think you'll find money you spend on the RB25DET will be way less than the cost difference or time consumption if you diy of putting in an RB20. If you just wanna be unique, try a 2JZ (Supra) or something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...