Jump to content
SAU Community

Recommended Posts

hey guys, just got a quick question for any1 that might know..

What front bar is this? is that a factory option?, after market? or standard?, I've noticed its on a s3 GTR BUT I've been looking around and havn't came across a s3 gtr with that front bar.

any ideas?

post-40593-1276556073_thumb.jpg

Edited by OoskylineoO
Link to comment
https://www.sau.com.au/forums/topic/324903-what-r33-gtr-front-bar-is-this/
Share on other sites

My guess is, it is the Nismo front bar. (Not to get confused with the Nismo 400R front bar).

Has the intercooler vents, what looks to be larger vents to feed air to the brakes / calipers / rotors on the front lip.

2 vents next to the indicators and vents on the side.

Its one of the Series 3 options. i have a genuine series 3, 1998, but mine does not have this extra vent. however i have another genuine series 3 1997 end i believe that does have this so to my understanding it was an option. they rare as allready stated.

pics of the NUR / M-spec 34 to the left of shot pls :D

nissan1.jpg

The cleanest Nissan Skyline R34 GTR V-Spec II Nur you will ever find!

:cool:

any1 have any ideas where you can source one from? lol honestly have never seen that bar locally

Try Nissan or a wrecker / place that sell bodykits.

Nissan will rape your wallet, so you might wanna go aftermarket.

any1 have any ideas where you can source one from? lol honestly have never seen that bar locally

Powerplay imports in sydney have East Bear GT-R replica bumpers like pictured, with/without the air vents if that helps.

they were are bout $1600 when i bought one a couple of years ago for my R33 when i had it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...