Jump to content
SAU Community

Recommended Posts

Hey all,

I've been refered to RaceBrakes (9609 1101) down in Wetherill Park for performance pads for the 33gtst. 8O

Has anyone tried these pads and compared them to others? :)

I got quoted $155 for a front set with in mind 'street driving and the occasional track day' which is pretty reasonable. :P

They gave me identical specs as Green Stuff, 650 degrees, low dust etc and they are a little cheaper. :twisted:

Specs are one thing, performance is another so what do you guys think?

Link to comment
https://www.sau.com.au/forums/topic/325-racebrake-pads-how-do-they-rate/
Share on other sites

  • 3 weeks later...

Got a set on my car and their better than the EBC Green stuff on the track. They are harsh on the rotors I must say. Also a fair amount of dust too. But I love them. Won't forgive EBC cause they failed me on the track after one session and paying so much for a pair. :evil:

  • 2 weeks later...
Guest GregGTR

I had racebrakes Street/Race compound.... and they were SH*T, I went through a set in 10 laps of Sandown, there was a huge amount of brake fade, they were spongy.... Over all they were bad!!! My previous set (Jap Brand ????) was awesome, so I know its not the car's fault.....Sorry to break the bad news to you mate....

Plus they are noisy.....

G.

Originally posted by Silver-Arrowz

Won't forgive EBC cause they failed me on the track after one session and paying so much for a pair.  :evil:

You can't expect too much from the EBC Greens' as they're not really designed for track use, they're more of an upgrade from the stock road pads, ie they're kind to the discs but provide improved road braking performance.

EBC Red' / Yellow' or Blue' are more suitable for track use.

Originally posted by whatsisname

You can't expect too much from the EBC Greens' as they're not really designed for track use, they're more of an upgrade from the stock road pads, ie they're kind to the discs but provide improved road braking performance.  

EBC Red' / Yellow' or Blue' are more suitable for track use.

Yep your on the money they buddy,,,,you guy's running track days should bed in some reds or better and only use them on the track. It's bloody easy to change them there....You gotta do a lap or 2 to warm everything up anyway.

I brought the EBC from Croydon Austosports. They told me that the green stuff was good enough for the track. I can't remember but some other dealer also said they were great. Anyway, I told them maybe I should go the red stuff, but they assured me green was good enough for a few sprints around the track. Yes I did warm them up properly and they felt great for a while until they faded and never came back.

The pads now are just about to go so next I'll try a set of Endless, the $500 ones, and see how they go.

For the money you pay for the Race brakes ones, their pretty good. About $150 I think.

Originally posted by Silver-Arrowz

I brought the EBC from Croydon Austosports. They told me that the green stuff was good enough for the track. I can't remember but some other dealer also said they were great. Anyway, I told them maybe I should go the red stuff, but they assured me green was good enough for a few sprints around the track. Yes I did warm them up properly and they felt great for a while until they faded and never came back.

On the EBC web site, & if you speak to EBC on the phone, the Greens' are recommended for road use. Why CAS & others told you otherwise is anyones guess?

Here's the info on the Greens' from www.ebcbrakes.com.au

This pad features a high Kevlar content formulation resulting in an ultra high performance "road pad" which is extremely kind to discs. With a friction so-efficient of around 0.5 and a high resistance to brake fade (650ºC) this pad is a superb upgrade for high performance street cars, high speed freeway use and consecutive heavy braking. If you are experiencing brake fade with your heavily loaded 4x4 or towing vehicle, you should be using Greenstuff!
Originally posted by ONARUN

I've got endless. They squeel like nothing I've heard before (ask anyone that's met me) but they do the job well. It sometimes feels like they won't but if I get on the anchor real hard they perform.

i think i spoke too soon. was on the old road today and one of my pads fell off! this doesn't take anything away from the performance though

Interesting comment from the website that they are "kind on discs".

They gouged mine quite badly and they required a heap of grinding when the pads were replaced.

I've gone back to Bendix Ultimate - I want something quiet for the road that can also be used on the track - these fit the bill. The green stuff really faded after a few hard laps.

I went straight from Ultimates to Green stuff, and found the Ultimates to fade much less. Also, as per previous post, the green stuff were pretty rough on the discs.

Both were regularly thrashed on both road and track.

im using kemtech metals on the front and standard pads on the rear as they dont ever over heat

iv been to wakefield twice and never had a problem and done 40,000ks aswell no problems and not rough on the discs either

by the way i drive an auto and its a little harder on brakes than a manual

the only problem iv had was boiling brake fluid so i changed it to motul high temp fluid and i havent had any fade since

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...