Jump to content
SAU Community

Recommended Posts

Hey guys,

not due for a service for around 5,000km but i thought id gain some info etc before hand. Im debating whether or not to take it to Nissan direct or local performance shop to get log book servicing...

What are your experiences in particular and are they cluey enough to do things like using fully synthetic oils etc?

Thanks in advanced.

Link to comment
https://www.sau.com.au/forums/topic/325087-v35-scheduled-servicing/
Share on other sites

Given there are a whole 3 people with V35s associated with the SA section of SAU I would say this post is inappropriate in the SA forum. I will move it to the "V"" section of SAU.

In answer to your question I service mine myself, but when it comes time to do major services it will be going to Nissan, as they know these things inside out, and I assume almost nobody else in SA has even touched a VQ35 before.

too bad u r in SA....in VIC, it definitely has to be City Nissan hands down...I've taken my car there twice, and twice I have found the pricing very 'down to earth'.....

I got my belts done for the same price as I would have at Ultra Tune...

My service was comparable to Midas and Ultra Tune...

They charged me peanuts to change my CVT oil...

I just don't bother doing mechanical/sevicing things myself anymore these days; unless I really need to....

while Nightcrawler may not have the best opinion of Sinergy Motorsports (perhaps only from the carsale side of things, no disrespect intended) my recommendation would be Sinergy as they have had lots of experience importing and servicing V35's over the years (including mine). otherwise a number of my Zed owning friends have been going to Unley Nissan from new. both have the VQ35 so really either location will be fine for general servicing

too bad u r in SA....in VIC, it definitely has to be City Nissan hands down...I've taken my car there twice, and twice I have found the pricing very 'down to earth'.....

I got my belts done for the same price as I would have at Ultra Tune...

My service was comparable to Midas and Ultra Tune...

They charged me peanuts to change my CVT oil...

I just don't bother doing mechanical/sevicing things myself anymore these days; unless I really need to....

How much do they charge for a normal service like oil change, filter change and the usual stuff?

Oh yeah forgot to mention that Main North Nissan is an SAU:SA club sponsor, so if you become an SAU:SA member for $45 (and $30 per annum thereafter) you get 10% off everything. Craig is head of the parts department there and is a Skyline NUT, so has always looked after me on parts etc and said I was welcome to bring in my old R34 or now the V35 for servicing/repairs.

Ah sweet,

thanks nightcrawler. I think i might stick with local performance shop though, they did an oil change for me when i first got the car it only cost me $140. That was for fully synth oil, greddy filter and of course an hour of labour. I downloaded the 350z service schedule from Nissan main site so i'll get them to follow that, though it may be overkill since i'll struggle to do 5,000kms per 6mths.

Ah sweet,

thanks nightcrawler. I think i might stick with local performance shop though, they did an oil change for me when i first got the car it only cost me $140. That was for fully synth oil, greddy filter and of course an hour of labour. I downloaded the 350z service schedule from Nissan main site so i'll get them to follow that, though it may be overkill since i'll struggle to do 5,000kms per 6mths.

haha 5000ks in 6months.

my v would love that sort of treatment.

i get 5000ks in 6-8 weeks. =P

  • 3 weeks later...

As per my post above, Main North Nissan has a Skyline nut at the head of the parts department, and offers 10% discount on all products as SAU:SA sponsors .... but I had dealing with North East Nissan (same owner) before they moved (to become Lakeside Nissan), and found them to be below par imho.

Wow, I use Main North Nissan heaps, and I'm an SAU:SA member - I never knew we got discounts .. d'oh .. I reckon I've spent at least $500 with them in parts for my N14 and R34 in the last 3 months alone too :bunny:

... I guess this explains why I'd always gotten a great resposne from their mechanics/etc when i brought my R34 down though - always happy to source parts from Japan, and I got them to fix my drivers-side power window and they seemed to know everything and take care of it no problems ..

I too can put in a good word for Lakeside Nissan on Main North Road. I have been taking my V35 there since I got it, and have had no problems with any of the work they have done. I did once have a minor issue with some damage the car sustatined while being serviced (small gouge in spoiler) which they repaired for me at no cost and minimal fuss. Cant say much for prices though as my V is salary sacraficed through work and I get fleet prices :bunny:

I live in brisbane and nissan deals near me said they dont touch imports .... and seemed very un helpfull and couldnt give me any sujestions as to where to go, tho i did speak to a really nice guy in spare parts for the A/C and P/S belts

  • 2 weeks later...

I have a 350 GT8 with the paddle shift and get it serviced at Main North Nissan. When I first went there and spoke with the service guy he told me they just followed the maxima service schedule and pricing.

I was surprised by the number of parts they can source from other Nissans that are interchangeable, and considering the engine is the same as the Zed, you wouldn't think it would be a problem.

I was speaking to the parts guy and they have access to all the V35 manuals for all parts. Been looking at ditching my Bose stereo and getting an after market and he was able to find all the facia and parts to do the swap. Prices were reasonable when you compare chasing all the stuff on the internet yourself, but through them everything is direct from Nissan Japan and covered by full Nissan parts warranty. Don't get that if you buy from anyone else.

I live in brisbane and nissan deals near me said they dont touch imports .... and seemed very un helpfull and couldnt give me any sujestions as to where to go, tho i did speak to a really nice guy in spare parts for the A/C and P/S belts

West point Nissan up at Indro say that tehy can do imports.

Who do you use?

If you need someone, Id greatly suggest Craig at Carmen Auto up at Brendale. Greeat guy and knows these cars, has a 300gt himself i think.

too bad u r in SA....in VIC, it definitely has to be City Nissan hands down...I've taken my car there twice, and twice I have found the pricing very 'down to earth'.....

I got my belts done for the same price as I would have at Ultra Tune...

My service was comparable to Midas and Ultra Tune...

They charged me peanuts to change my CVT oil...

I just don't bother doing mechanical/sevicing things myself anymore these days; unless I really need to....

Just gave City Nissan Service a call and got a voice message saying City Nissan has ceased business as of 14th July. Not what sure what happened to them??

Just gave City Nissan Service a call and got a voice message saying City Nissan has ceased business as of 14th July. Not what sure what happened to them??

What number did you ring up?

Direct number for their service dept is 03 8383 8888. (or main reception is 03 8383 1111)

Hope this would help~

Edited by Japav

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...