Jump to content
SAU Community

Rb20 Auto Onto Rb30

SPOOLED 31
 Share

Recommended Posts

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted (edited)

it will bolt up to the motor yes, but dont expect it to last.

*As a guess the tailshaft yoke would be different, as would length. Crossmember would be different, and the speedo drive is a cable type on the auto box.

So no its not a drop in replacement :)

*note ive not seen the setup to be sure.

Edited by Bl4cK32
turboedsloth Grand Master

turboedsloth

Posted
Posted

ah ok if you say so.. in that case you need a 20 auto tailshaft, speedo adaption somehow, all mounts and i would be making sure the torque converter bolts onto the flexplate on the back of the 30. if it doesnt i would be getting one for a 20.

just out of curiousity do you have the holden 4n71b behind the 30 atm and is the 20 box a RE4R01A?? if you dont know wat i am talking about post some pics of what you have.

  • 4 weeks later...
drewbear Newbie

drewbear

Posted
Posted
ah ok if you say so.. in that case you need a 20 auto tailshaft, speedo adaption somehow, all mounts and i would be making sure the torque converter bolts onto the flexplate on the back of the 30. if it doesnt i would be getting one for a 20.

just out of curiousity do you have the holden 4n71b behind the 30 atm and is the 20 box a RE4R01A?? if you dont know wat i am talking about post some pics of what you have.

Interseting as I have just tried to put a rb30 box behind a RB20DET (red top) in a 200ZR import.... it doesn't go lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...