Jump to content
SAU Community

Recommended Posts

Hi all,

Tonight I was driving my 1996 gtst, with fmic, 3" exhaust, Bosch 040 fuel pump, stock turbo, stock ecu, 10psi... and as I was turning into a corner and feathering the throttle back on softly, the engine hesitated (exactly the same as it did back when the AFM was playing up, like a complete throw-you-over-the-steering-wheel cut-out in gear hesitation) before dying completely. On starting it up again, it hunts around very roughly at idle, won't allow revs over 2krpm and as soon as I put load on it in 1st gear, the engine dies. If I hold the throttle at 20%, it hunts around as it does at idle but intermittently revs up (like a quick to-the-floor depress on the throttle every five seconds) even though the throttle position hasn't changed.

Luckily I was only a couple of hundred meters around the corner from my house so I could limp it home with persistent revving + quick soft blips with the clutch to keep it rolling...

Although my suspicion lies with the AFM (which had given me grief a couple of months but was fixed by re-soldering the plug), I was wondering if anyone might have had a similar problem or might know what would suddenly cause this?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/325956-rb25-sudden-illness/
Share on other sites

happend to me when i 1st put my highflow on, 18psi was a lil too much for the standard crappy hose clamps lol.

and it just happend to do it when it was raining at night time, but for some lucky ass reason i had a few tools in the car and it was close to home

first time i tuned my car on 30psi, everything was fine on dyno...

took it to the street and was boosting in third gear, cooler pipe come off.. it was soo violent i thought i destroyed the engine lol

it serously felt like something left the engine bay and went under the car, like engine parts etc etc i was very happy to see the cooler pipe off when i went to inspect the damage :)

Do not worry about it, its a common thing. Here in Georgia I see all kinds of dodgy cooler piping that break and leak which can make tuning a nightmare at times

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...