Jump to content
SAU Community

Recommended Posts

Theyre fast. Have you seen the GTR (R32) vs. GTiR video? The GTR struggles to beat one. You can tell the driver is really pushing the GTR as its hanging its heavy ass out in every corner while the GTiR does them very neatly.

The GTR is faster but at what cost.

I mean cost as in the GTR had to be pushed to its limit to be faster around the track. Both stock cars.

The GTiR is light and fast but those are not the only reasons for choosing a particular type of car. Aesthetically it is unapealing. I have never been a fan of hatches. Its too small. The stereotype following GTiR drivers around is even worse than the Skyline stereotype. etc.

gtir's are quick, theres no doubt about that, but i can give you a few reasons why i went a gts-t.

- doesn't look like a jumped up hatch with a sikkk bonnet

- interior is less cheap in fit & appearance

- most of the parts are common across several models, where as the gtir has many specialised parts that can be hard to get.

- i like rwd street cars

- i like 4 doors

however, if i was going to get a strict track style car on the cheap then a gtir would be a good place to start

Yeah that says it all.

The GTiR is a light weight crude rough ugly little road rocket, great fun.

The GTR is a far better more solid and sophisticated road car in a completely different class.

If you are 20 get the GTiR. If you are closer to 35 the GTR probably has far more appeal.

ohhh phew..

lol i couldnt sleep last nite, cause i was half chopped by a GTiR.

I was at the lights at like 2am? and like i wasn't intending to drag him or anything, it was just that the road was to form one line, so like usual i just step on the pedal a bit, just enough normally to beat most cars ya know. I didnt see what car was next to me and i only saw it was some little box so i was thinking no problem! but OMG! first gear he was in front by a bit, den after second..it just went crazy....i was like ....wow....Altho i didnt really floor or push my car, but that's the first time i have been kicked like that in my r33

-_-;

at first i thought i got chopped by some lil mazda astina or some shit but at least now i feel beta that i got beaten by a much faster car =) *sighz*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...