Jump to content
SAU Community

A Morning In Jandakot

Mickya

By Mickya,
in WA Wasteland

 Share

Recommended Posts

Mickya Enthusiast

Mickya

Posted
Posted

i woke up at about 10. went outside and my dad showed me how some water on a utes canvas had frozen over.

the pics i've taken of the iced over water have had sunlight beeming on them for the past 3+ hours, now our cars icing over in the morning is nothing new, but to have birdbaths and large puddles form a thick layer of ice is something else. when he first went outside at about 7 he was hitting the ice on the utes cover to try and break it but it was too thick at that point.

Picture534.jpg

Picture533.jpg

Picture532.jpg

Picture531.jpg

Picture529.jpg

Picture528.jpg

Link to comment
https://www.sau.com.au/forums/topic/326270-a-morning-in-jandakot/
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Still looking everyone....
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Thanks guys - I have been overseas for a hectic many weeks , so haven't had time to chase any of these up.  Some of the suggestions are for 4.1 ratio, which I already have, and a 3.5 at Lonsdale, which is also too tall.  Really looking for 3.9 or even a 3.7 LSD, either with M12 bolts. Will look some more.  
    • Murray_Calavera
      MAJOR FUEL ISSUES 25det neo r32

      By Murray_Calavera · Posted

      Yeah sounds like the swirl pot isn't being fed from the return line, would be made even worse by the high flow pump. 
    • GTSBoy
      MAJOR FUEL ISSUES 25det neo r32

      By GTSBoy · Posted

      This is the R32 one and the inside of the tank should look like this. which has an internal swirl pot, that the return line must empty into. (Interestingly, because the GTR tank is plastic it misses out on the swirl pot.) That is a potential cause for an aftermarket pump hanger to mess things up. Maybe the return is cut short and squirting over the side.
×
×
  • Create New...