Jump to content
SAU Community

Recommended Posts

Anyone had experience with these...they are basically a nismo speed + odo

which directly replaces ur original speedo + odo

I installed one in my r33...but the speedo isnt reading properly (im doing wot feels like 60-70..but speedo shows only 20kph)..

Is there any special tricks involved..like re-calibration etc?

thankx

Link to comment
https://www.sau.com.au/forums/topic/32665-nismo-300kph-dash-cluster-problem/
Share on other sites

really? thankx dOOd...but the thing was...this speedo wasnt fresh outta the box..it had previously been on another r33..

so would i really need to recalibrate again?! that part didnt make sense to me...

unless the calibration got knocked out..?

wots it cost to calibrate neways?!

I'm not sure how much it costs, I had mine done under warranty through the car yard because it was not reading correctly when I purchased the car. Mine was not new either and had previously been on another car.

Any guage place should be able to do it for you though. Just do a search on www.yellowpages.com.au for 'gauge'. There are pages of places listed that should be able to help.

I have that instrument cluster, all the wireing seems to be printed circuit stuff how could it "decalibrate", Mine is actually a Nismo GTR cluster...no boost gauge... but it still worked perfectly in my GTS25T

yeah! i agree wit him hehee i pull out just the speedo part...and umm it is all printed IC stuff... there is a small motor or sum sort there tho..couuld that kinda get stuck a bit and jam??

51jay: uve got the entire Nismo GTR cluster right? ive just got the 300kph speedo section installed into a standard GTS cluster..

On the PCB of the factory R33 speedo you will see a series of solder pads/jumpers, this calibrates the unit. Ie an automatic uses double the signal pulses of a manual, so take a automatic speedo (or one setup for it) and it will read half of the true speed if fitted in a manual. Don't have one in front of me, but its just a series of jumper connections on the upper left I think, each jumper is so much %, ie one jumper will add in 20kph (at what whetver hz your feeding the signal at), and the next one down will add in 10kph and next 5kph and you just jumper till its right. I assume the Nismo is the same as its basically just a new face plate and possibly geared differently, only seen a couple and that was early last year...

So you can do it yourself, or pay a few $$ get someone else to do it, will only a few minutes if they know what they're doing (plus time to remove and refit if you take the car)...

REALLY! damn cuz ive returned the damn unit to the ppl i bought it from...but when i had it..i yanked out the speedo section of the cluster but cant rememebr seeing any jumpers...

wot do the jumpers look like?? (they arent like PC motherboard jumpers are they??)

I'm not 100% sure, but I think the speed signal might get split from the cluster and goes to the relevent ecu's (engine, auto, hicas or powersteering modual for non-hicas cars).

I know when a GTS4 lost its hicas/4wd it was the speed signal that was missing, but I never actually found its source, I ended up piggy backing off ecu pin 53.

R34's are definately from the ecu, but change the signal thats output from what I've heard.

The speed signal from my microtech ltx-12 ecu which goes to my auto computer may need to be altered in some way in that case.

I reset the auto ecu by disconnecting the battery and reconnecting it which seemed to fix everything, but the next morning once the car got hot the same trouble came back with the gearbox failing to drop into a lower gear under full throttle at 70kph it stays in 4th.

So I am assuming the speed signal is not right going through from the LTX-12 to the auto computer.

Where is a good place to get the auto computer looked at in Sydney?

Wonder why it only seems to be an issue when the car gets hot.

Other symptoms are the overdrive button stopped working and the oeverdrive light flicks on and off by itself when its bumpy or I hold the gearstick in first under hard acceleleration the light comes on (o/d off), then goes off again once I move the stick to second.

I am getting the front castor rods fixed up this week - front left one has split - wondering whether this affecting ABS may affect the gearbox like this?

Once I go to full stop the next accelleration is normal but if then cruise for a few moments it won't drop a gear again when I plant the accellerator.

Maybe the ecu needs to put out a normal signal to the auto computer

while the double hz frequency goes into the ltx-12 it might need to convert back to half rate Hz to go to the auto ecu?

Anyone know what is supposed to happen for R33 series 2 auto?

edge: just outta curiosity right...LTX-12 = 6cyl ECU...???

wots the diff with LTX-8? cuz i think thats a 6cyl ecu as well?

oh and has anyone actually seen how the "signal" is sent into the speedo?

the 4 screws that actually hold it in place..conduct the signel thru the cluster to the speedo..a fren showed me that..cool stuff! heeh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...