Jump to content
SAU Community

Recommended Posts

Hi guys, recently had a R34 GT-V skyline go in for inspection in anticipation to buying.

Came back with positive results, thought i'd share them:

r34results.jpg

Uploaded with ImageShack.us

r34results2.jpg

Uploaded with ImageShack.us

Just a question concerning Steering Rack, it is noted that free play is evident.

Also steering pull tends to drift to the left.

How would I go about fixing these problems?

Any comments are appreciated, extremely excited about the car

Link to comment
https://www.sau.com.au/forums/topic/326791-r34-skyline-inspection-report/
Share on other sites

check and ask a mechanic

they sound like basic normal issues to me and most related to wear and tear

i mean some of the reports you get pick up every bloody single issue

and dont focus on the basics, ie engine compression, engine health, and pick out little things like dirty caps etc when more important things could be checked

I've heard there are many other checks that is better than the RACV one. State Roads is one of them.

Also, wouldn't be a bad idea to take it to a mechanic that knows lots about imports, especially Skylines.

use it as a baseline and ask a mechanic workshop (print out the list) to check over them

when i had my ECR33 checked it had 2 pages of little shit and issues

the car had 58,000 on the clock and still going strong with 223,000

so check the specific detail of each item and clarify what they mean

from your report the brake pad issue and keyless entry stand out

the rest seem normal. i mean what 1999 car that is 2nd hand isnt going to have some level of scratches, minor wear/tear and refinishing evidence

An RACV test is not worth wiping your arse with.....i wish people would stop giving money to those (unts

Oh I see what you did there :blush:

When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.

Oh I see what you did there ;)

When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.

I don't think it's $500..... In the other thread, people have stated $250-350 :D

An RACV test is not worth wiping your arse with.....i wish people would stop giving money to those (unts

+1 for the above

I had a stateroads inspection done on the wifes car before purchase....can't remember the exact amount but wasn't over $250. Very happy with the detailed inspection and would highly recommend.

Stateroads is excellent. My mate had an R34 looked at and not only did the guy know everything about cars (obviously), but Skyline specific too. He could tell that the gearbox had been poorly rebuilt and that it was missing some factory seal (can't remember what it was).

Hey guys so i've considered everything and am going to go ahead and purchase the vehicle.

Where would I take it to clear up the problems now and possibly in the future?

SE suburbs btw

Edited by MaddehZ
When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.
I had a stateroads inspection done on the wifes car before purchase....can't remember the exact amount but wasn't over $250. Very happy with the detailed inspection and would highly recommend.
Stateroads is excellent. My mate had an R34 looked at and not only did the guy know everything about cars (obviously), but Skyline specific too. He could tell that the gearbox had been poorly rebuilt and that it was missing some factory seal (can't remember what it was).

+1 for http://www.stateroads.com.au/ , I got my R34 GTT inspected by them before buying it a month or two ago. It's not cheap though at $289 for the comprehensive inspection but you will know heaps more about what you're buying. I also got a quick second opinion by the workshop that did the roadworthy and then took it to Chasers to address one tricky issue.

MaddehZ your RACV inspection report doesn't look too bad provided that the inspector wasn't completely clueless, IMHO. Have a look at the Local Wreckers And Workshops thread for a knowledgeable workshop near you to get that stuff sorted.

The car is from power road, and no the racv check was kind of the decider for me as to whether it was a go-er. Wise choice ?

I've heard good and bad from them and I've been there a few times for myself or for friends. But I still reckon RACV shouldn't be the decider, but a proper mechanic. That's my very honest opinion :cool:

If you are spending that much money on a car, you might as well do everything within your budget to make sure everything is okay, instead of buying it then realise it's a lemon :rolleyes:

steering play in a skyline is usually basic stuff (quite common), non issue really, even if worse case it was bounced off a gutter and the rack was US then your only up for a max of $500 fitted anyway. Id say rack mount bushes or tie rods are slightly worn.

To the people saying it's not a thorough inspection based on this fault report...seems to me they've only listed what is wrong with the car (the important part) and not what is fine with it. If it's a well kept car then the fault report isn't going to be very extensive. I'm sure the actual inspection had a hundred more variables to check for than what they listed on the faults report. I guess they could have been more specific with the source/cause of the problem and a possible fix for it but that's your mechanic's job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...