Jump to content
SAU Community

Recommended Posts

Andrew,

A good mate of mine up your way (his nick is 'third' on SAU) has been researching this exact topic recently! He has a '97 GT-R with a quite a few mods (311awkw SAS dyno) & at times runs 20+psi.

As you can imagine he's had a wide range of responses on the stock BOV topic. Jim from CRD seemed to think the stock BOV's weren't a problem even at mid 300kw levels (at wheels). We asked a few local Adelaide tuners & one of them said straight away that above 15psi & they "can" leak.

He is planning on doing a bench level pressure test to see exactly what psi his BOV's open, may have already done it?

No prob's mate. It 'may' take a little while for him to reply as he's not a frequent SAU user (posted twice in total) Tell you what, I'll give him a ring tonight & see what he's got to say.

Do they leak easily?

I'll be running upto 1.5  bar... Will the stock BOVs be okay? Or will they be leaking causing me to stress the turbos out unnecessarily to make 1.5 bar at the plenum?

Theyre crap, want to sell them to me or trade for Blitz DD setup? :):D

Being serious though, ive been told by many a shop they can hold decent amounts of boost without leaking (upwards of 1 bar). If you do take them off, send me a PM as ill be extremely interested in buying them. The Blitz ones are cool and all, but nothing compares to the woosh noise the stock ones make.

Hey, thanks heaps for the help guys!

Amaru: I'll probably end up replacing them with a single Trust Type-R BOV in a few months time... If I do, I'll send you a PM...

YRL05S: That would be great, but does your compressor have variable psi? If not, how will you know what pressure it takes before they open? Let me know how you go :)

  • 2 months later...

Merli,

I have used Blitz ones and they make the car run terrible. Boost isnt responsive and idle is horrible. On recommendation from HKS Japan, I have returned to the standard GTR ones. Even HKS do not recommend replacing the bov. Even if using a hks item.

Quote: "BOV changea.. noo good.." "Original good"

FYI: this was for a gtr running 2530's.

Whoa... this is an old thread! :D

Butthead: I'm not going back to stock BOVs, I have them on there at the moment, and I was worried that they would open prematurely and leak, causing my turbos to spin extra hard to make the 1.5-1.6 bar I want at the plenum... So I started this thread to see if I would need to change to a Trust Type-R or something like that... Seems like the stockies will work just fine!

Thanks N/A... Sounds like the stock bovs are going to stay! :(

Kamikaze: Not sure whether they're spring or diaphragm-type bovs... In fact I don't even know if there's a difference :)

Guest INASNT
we should ask leewah how they are as he still uses them on the 500rwkw plus gtr

the ice supra which has 400+rwkws runs these aswell aparently

niges supra is putting down 500rwkw with 2 bar boost now and still using stock GTR bovs just like Leewah, so i guess they aint that bad.

I got some in my car now as well and its holding 19psi and 280rwkw easily

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...