Jump to content
SAU Community

Recommended Posts

Ok guys, stripping down another 32gtr.

This one is immaculate, 61xxx km chassis, has clipped a gutter sadly and smash the tow hook, bending the rail!

So here is a list of parts that will be coming out of it. This is off the top of my head atm, so I might be forgetting some stuff!

GTR bonnet - mint condition, black, alloy - $450

GTR front guards - mint condition, black, alloy - $350 pair

Projector headlights - $200

Apexi N1 coilovers, approx 2000km old. I think 11/9 rates, base height adjustment, damper adjustment etc PERFECT condition - $1000

Giant blue swaybars, will measure for exact size, unsure of brand but are bright blue and solid - $400 pair

32 GTR brakes, great rotors, good pads, $800

Nismo GMAX twin plate clutch, will measure discs when I pull box off. $900

GTR front seats, immaculate - $600 pair

GTR rear seats, immaculate - $200 set

5 point cage, with front side intrusion bars, great condition - $600

Door cards and all interior trims are immaculate, dash cluster shows 61,xxx km, all for sale, pm me offers on parts.

Genuine GREX oil cooler kit, with relocator and thermostat, perfect condition. $650

Engine:

Motor is a low km motor obviously, has a metal headgasket, HKS cams (will check size), HKS cam gears, 550cc injectors, R34 N1 turbos, Chipped ECU, loom, and everything to suit.

Bottom end - $1500

Head - $1500

R34 N1's - $1200

Cams & gears - $800

Injectors - $500

Would prefer to keep motor together as a solid running package. Will sell motor complete for $4500 with everything it needs to run!

As I said, there is probably more stuff! It just escapes me right about now.

Will also take offers on the shell, uncomplied, minor scuff on drivers rear quarter, all panels mint, glass mint, bootlid with wing, etc.

Pm's would be your best bet!

Also have.

japspec S15 motor with 76,xxxkm, 6 speed gearbox, and everything inbetween, from clutch fan to tailshaft everything out of s15. $4200, all mint, will compression check tomorrow. Has jap bb turbo. Removing as I'm going RB.

S15 passenger seat - $200

S15 5 stud conversion parts, hubs, lca's, brakes, etc. $1100

S15 trial front bar $200

s15 rear cradle, stock arms, no diff, shafts, hubs. $350

Link to comment
https://www.sau.com.au/forums/topic/327701-another-32-gtr-part-out/
Share on other sites

Drivers side interior panel , (PERFECT condition) ANd i need the thing to keep the boot from coming down, i dont knw what its called. Also right side Blinker. can you do me a little deal for all these PM me

hey bud do you have the plastic thing that holds the (gear lever boot)

sorry for the lack of TECHNICAL termanology.. lol

but i need that and also the passenger dash vent.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...