Jump to content
SAU Community

Recommended Posts

Haven't had any interest in car so just selling engine, if no interest in engine then I'll start parting it out. Heads up that I don't have much spare time to pull it down so please understand the big bits will be sold first and small parts last if it comes to it.

Car has made 465hp @ wheels, had a lot of fun building it but haven't got the time or money to put it to use. In the time its taken to build I've gone from a single full boost hoon to a happily married sedate loving father. Having two kids under two years old makes it a lil hard to get out to the track and I'm not one for a Sunday drive anymore. If not sold as package I will keep some bits so I can put a stock motor in for the odd hill climb or to sell the car.

Whole lot $13,000 (should be everything you need for conversion to RB30/26)

Happy to hear serious offers

Engine: ($9,000)

-RB30 Block/Crank with turbo water/oil threads

-RB26 Head

-Precision Rods

-ARP rod bolts

-ACL race bearings

-ARIAS forged pistons

-Tomei oil pump

-Jun crank collar

-4 layer MLSR steel head gasket

-1mm head oil restriction and one blocked off

-std GTR cams

-1inch custom head oil drain

-Head ported by Darren at Lewis Engines

-Modified larger sump with head oil drain and catch can inlets

-std GTR plenum, inlet manifold and throttle bodies

Turbo kit: ($2700) has done aprox 10,000km

-Garrett t04z (0.84 rear, 0.70 front)

-Trust high mount manifold

-Trust waste gate

-Water/oil lines

-Greddy Y intake

Electronics:

-GTR engine wiring loom (modified to suit R32 gts-t) $500

-Power FC D-jetro (hand controller, map sensors, R32 GTR plug ecu) $1000

-800cc SARD injectors ($800)

Other: (only for sale with engine as a package)

-R33 5 speed with modified speedo sender

-5 puk clutch

-Custom one piece tail shaft

Thanks people

post-16618-1278422928_thumb.jpg

post-16618-1278423086_thumb.jpg

post-16618-1278423173_thumb.jpg

post-16618-1278423431_thumb.jpg

post-16618-1278423496_thumb.jpg

post-16618-1278423600_thumb.jpg

post-16618-1278423655_thumb.jpg

post-16618-1278423707_thumb.jpg

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I made the catchcan, 4 liters works well. Wasn't intending to sell it but I also didn't think I'd ever want to sell the engine. Let me know how much you'd pay for one and I'll think about it. Might even see if I could build another.

I did a compression test a couple weeks ago and thought the compression was a little low and I just found out why, there is a rubber o-ring missing where the spark plug thread adapter screws on, without it it screws up to far. Also just been told that I should be doing the test hot with all spark plugs out and throttle open which I wasn't doing before so I'll give it another try this weekend.

Power FC not sold, got a bit ahead of myself.

Price change to $12,000 ono for complete engine package

Price change to $17,000 ono for full car

Compression test redone, much better, pics attached aprox 150 over all. Engine was about 50-60degrees so not hot but still warm and throttle was held open unlike last time.

Also found video of last event I did, just small mucking around stuff.

post-16618-1278728858_thumb.jpg

post-16618-1278728926_thumb.jpg

post-16618-1278729007_thumb.jpg

post-16618-1278729082_thumb.jpg

post-16618-1278729153_thumb.jpg

post-16618-1278729214_thumb.jpg

Edited by =premo=
  • 2 weeks later...
  • 2 weeks later...

17psi, engine would be able to make more but that was max fuel. Need to upgrade fuel pump and fuel lines but I believe it already needs a stronger gearbox with this much power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...