Jump to content
SAU Community

Recommended Posts

Hey guyz, going to get an alarm soon in my r33 and was wondering if my car has an actuator so i can save a little cash if its there?

I opened the drivers side door and there is a unit with an aerial sticking out/ Does that mean it has one?

The car didnt come with any remotes but even under the dash there is a box that looks like a factory alarm box.

thanx 4 the help.

Cheers.

Vish.

Hey mate. Sounds like your car does/did have a factory alarm/central locking. But chances are that if you didn't get remotes with the car, you might run into trouble getting replacement ones, as most factory systems require one working remote to code a new one if that makes sense? Don't worry too much about the cost of the (i'm assuming) door actuators, as most remote alarm/immobiliser/central locking kits will come with actuators, and you car buy cheap basic central locking kits with 4 actuators for as little as $20-$30 with universal fit 4 wire actuators. Hope that helps. :whistling:

My car had a factory actuator, had to buy an after market one anyway as it would not work with the new alarm properly, missing some wires or something, cost an extra 50 bucks fitted, no biggie. So i wouldn't worry too much.

100% sure your car will have a factory actuator.

if the immobilizer/alarm system cannot use it and needs another one then its shit, get another one

im using a cyclops one, cost'd around $120 from memory (can look it up and find out for sure if ur interested) and it done everything, central locking, its got an alarm, boonet switch and shock sensor, and i also bought a chip which you change over which allows it to work with a turbo timer, this wasnt very expensive and was very easy to swap over (in and out)

i can do a cashy and install one if u want, or our workshop does pretty good price on supply & installs on immobilizers (autowatch) the very very basic ones, and also keypad ones.

in ur other thread u said u were on a bit of a budget, id recomend the cyclops, but if u want a mother of a systhem then go for an autowatch one they do an awsome kit with motion sensors and all that crap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...