Jump to content
SAU Community

Recommended Posts

hey guys, what oil should i put in my diff? its in an R33gtst, should i use the 80-90 or the thicker 80/90-140? (not sure if its 80-140 or 90-140) also, should i use normal diff oil as apposed to LSD oil? as i beleive the diffs are VLSD and dont necessarily needs LSD oil

any help is apreaciated

cheers

Link to comment
https://www.sau.com.au/forums/topic/328173-80-90-or-8090-140-lsd-or-non-lsd/
Share on other sites

80-140 i would use on a track car, 80-90 for a street/track car. Nissan specifies 80-90 for japanese conditions iirc for rear LSDs

whats iirc? and is that an lsd fluid or normal?

mines a VLSD, would it need special lsd oil or standard gear oil?

Flushed and filled the LSD on both my 33's a couple of days ago with Castrol SAF-XA 80w-140 Full Synthetic Limited Slip Rear Axle Oil. No complaints so far and was told it’s a good oil. I’ve heard that if you have the limited slip diff, you must put LSD oil in or it will not work correctly but you can put LSD oil in non LSDs.

Run everyday 80w90 in your standard R33 GTS-T diff, mineral or synthetic. This will be fine unless it sees alot of track work - in which case you might want an 85w140 or similar. Note that you do not need to use a limited slip oil in a viscous LSD as a viscous LSD uses its own unservicable fluid inside the diff centre to operate. However, using limited slip oil will not do it any harm (aside from most mineral limited slip oils being a monograde 90 - non existent viscosity range).

Only mechanical diffs requires limited slip oil with anti-chatter additives.

Run everyday 80w90 in your standard R33 GTS-T diff, mineral or synthetic. This will be fine unless it sees alot of track work - in which case you might want an 85w140 or similar. Note that you do not need to use a limited slip oil in a viscous LSD as a viscous LSD uses its own unservicable fluid inside the diff centre to operate. However, using limited slip oil will not do it any harm (aside from most mineral limited slip oils being a monograde 90 - non existent viscosity range).

Only mechanical diffs requires limited slip oil with anti-chatter additives.

well i have put an anti chatter aditive in and its still grinding or "chatting" when turning, i cant for the life of me figure out whats wrong with it!

Did you read what I wrote mate? lol :(

You have a viscous diff, it does not need anti chatter additive...hence when you put it in it did nothing :D

Could be a manner of things wrong with it...these are use once and throw away diffs. Buy another one off eBay or put in a proper LSD.

lol do not trust many second hand items on eBay unless it's a solid state business with some impeccable feedback. Great nick is also a subjective use term haha. The plus to it is, if you choose to go with a decent LSD...you can get the centre installed in your spare diff housing while your car is still on the road...that's if you kept the old diff :D

Try Castrol SAF-XA out, if the LSD starts to behave strangly and locks up around a roundabout or in carparks (I heard it happening with Redline Shockproof in the diff, not sure if it was the grade 90w-140 or the fluid itself), just dump the fluid and go a different one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...