Jump to content
SAU Community

Recommended Posts

hey guys went to see a couple of supras today, dont worry im a gtr fan but p plates restrict me from buying one. Anyway the car i was looking at the exhaust was blowing white smoke i gave it time to warm up and was still blowing white smoke when pushing the accelerator down? what can be the cause of this im guessing clearly its not a good sign? also when looking for imports what are some good indications of how the car has been treated if the kms are legit? etc.. ? thanks guys any help will be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/
Share on other sites

white smoke? indicates piston rings are worn... not a good sign

good way to see is get him to start it cold, say when u want to see it dont run it before u get to his house, so u can see what its like to start

see how long it takes to start the car with the key, if it turns over for ages to start its not a good sign, a quick ignition is a good sign

when the car is running when warm, open the oil filler cap and see if any blowby is coming out, maybe get ur mate to rev the engine a bit to see the blowby, blowby is bad

check the chassie for cracks and suss repairs

check the sump for bog (if people stack over a gutter, they might bog the sump up to hide damage, ive inspected a car with this done to it)

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5342512
Share on other sites

the kms are never legit, that's part of import life im afraid. i read somewhere ages ago, before i bought my gtt, that the cars are often wound back 60000km, not sure how they knew that though...

hey clutch, will the blow by just look like sooty crap coming out?

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5351527
Share on other sites

There are so many things to come in to play when buying a car.

You should really get hold of a workshop manual for the car and read towards the bottom of the manual. It will come up with common problems on the car and the symtoms and fixes for all these electrical and mechanical problems. These are a guide line too helping you with getting a car thats running well.

Its the best way because you will forget to check somthing while you are there, guaranteed!

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5355264
Share on other sites

  • 4 weeks later...

My R34 blows white smoke and its because im missing a certain part in my Catconverter :blink: , at least i know its something i did thats causing that to occur and its not harming my car only the enviroment and anybody who want to hang around the back of it while its on. I suggest you leave that supra where it is at the dealer, my mates a mechanic so i had him check out my car before buying. Strongly suggest you do the same.

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5400399
Share on other sites

white smoke? indicates piston rings are worn... not a good sign

good way to see is get him to start it cold, say when u want to see it dont run it before u get to his house, so u can see what its like to start

see how long it takes to start the car with the key, if it turns over for ages to start its not a good sign, a quick ignition is a good sign

when the car is running when warm, open the oil filler cap and see if any blowby is coming out, maybe get ur mate to rev the engine a bit to see the blowby, blowby is bad

check the chassie for cracks and suss repairs

check the sump for bog (if people stack over a gutter, they might bog the sump up to hide damage, ive inspected a car with this done to it)

on supras the main cause is valve steem seals, not really piston rings. two of my mates own turbo supra pushing out bulk power and they both blow white smoke due to valve steem seals. Changing the oil will stop it for about 2,500km and then it will start again.

do a compression test on each cylinder. gives you an accurate reading of warn piston rings.

Edited by BenSm
Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5402806
Share on other sites

the kms are never legit, that's part of import life im afraid. i read somewhere ages ago, before i bought my gtt, that the cars are often wound back 60000km, not sure how they knew that though...

hey clutch, will the blow by just look like sooty crap coming out?

when u open your filler cap IF THERE IS blowby then it will just be smoke, not soot

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5402822
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No updates on the car but figured I'd share a nice outing. All the recent work paid off and I got it all together and out the shed for a car based pre-wedding celebration for a good mate of mine. Pretty casual cruise through the hills to a pub for lunch then out for some go-karting at The Bend. Headed down to Myponga for the night We stopped in at the reservoir before heading out down to the coast for lunch via the dam  By the end of the weekend away I covered 350km and the 32 generally behaved its self. A good Shake down after being apart before the Track day in a few weeks  
    • The front prop shaft from my GTR had very notchy unis, which obviously needed replacement but unfortunately uses the (usually) non-replaceable (staked) type.     A new shaft is something like $2K plus shipping from Japan.   I wouldn't even bother asking the local Nissan spares dept.     Rang Hardy Spicer but no go, which surprised me a little.     There's a place over Dandenong way that would make me a 'performance' shaft but un-necessary in my situation.   They claimed to be getting the equipment in to replace staked unis but couldn't give me a timeframe.   Anyway, long story short, found a place to do the work just 5 mins from me: https://knoxdriveshafts.com.au $420 (cash) and about a week later I have my driveshaft back.   Price includes balancing. Owner is a one man band working out of a shed in his backyard but from what I could see he's very well setup with some expensive equipment.  
    • Thanks. That's what I was after. One of the kits, the o-ring side is too big diameter. The other kit is a plate with a o-ring to seal and the hose connection offset.
    • oops that seems much easier lol. 
    • Are you using the factory rail?  Is there any reason you don't want to use one of the two you already have, they don't have to attach to the fuel rail directly.  If you 100% must have a FPR that directly bolts to the fuel rail, you could get a Radium setup. I use a radium fuel rail and the direct mount regulator, it is quite a sexy setup. 
×
×
  • Create New...