Jump to content
SAU Community

Hicus Light Pops On After 5 Mins Of Driving

ClutchBurndout-:(
 Share

Recommended Posts

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted

as the title says, i have my hicus still in and hooked up to stock etc, but the hicus light on my dash turns on after 5 mins of driving and dosent turn off unless the car turns off, what would be causing this? and how do i fix it? does the light mean my hicus is buggered?

cheers

PM-R33 Grand Master

PM-R33

Posted
Posted

What was the last thing you did to the car before the light started coming on?

It means it is getting an error of some sort and going into its failsafe mode. You need to work out what is causing the error.

I once had it happen when I shorted the speed signal wire, kept happening. Simply reset the factory ECU (disconnected the battery over night) and hey presto was fine again.

bubba Grand Master

bubba

Posted
Posted

Have you taken your steering wheel off lately? if it's not quite on straight, after a few minutes of driving HICAS will think you're driving in a really big circle and throw up an error..

Does your speedo still work?

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
What was the last thing you did to the car before the light started coming on?

It means it is getting an error of some sort and going into its failsafe mode. You need to work out what is causing the error.

I once had it happen when I shorted the speed signal wire, kept happening. Simply reset the factory ECU (disconnected the battery over night) and hey presto was fine again.

its been doing it since i got it, ill try disconnecting the battery, both terminals?

Have you taken your steering wheel off lately? if it's not quite on straight, after a few minutes of driving HICAS will think you're driving in a really big circle and throw up an error..

Does your speedo still work?

i havnt, but ive had the car for about 3 weeks so i dont know what the last ownder did,but how would it know that the steering wheel is off center? its only alen screws...

speedo is fine!

Munkyb0y Grand Master

Munkyb0y

Posted
Posted (edited)

the way it knows is there's a hicas related clock spring type wheel behind the steering wheel that turns with your steering wheel. so it keeps track of the angle. 'steering angle sensor'

but i dont know why ppl keep saying check if your steering wheel is off by a tiny bit. coz the splines dont allow you to be off by a tiny bit. it's very noticeable if you're off if only by one tooth.

i suggest taking your boss kit off and check that it has the appropriate holes in the back for the steering angle sensor to lock into. also, check that the sensor is still there.

Edited by Munkyb0y
bubba Grand Master

bubba

Posted
Posted

There is a steering angle sensor behind the boss, HICAS uses steering angle and speed input to decide what it's doing. Even one tooth out will freak the system out.. I'm talking teeth of the splined shaft that the boss goes on to, not the 6 bolts that hold the steering wheel to the boss.

bubba Grand Master

bubba

Posted
Posted

The sensor is a big white looking disc thing with two posts standing proud of it... really hard to miss.. as soon as you take the boss off there it is.

But +1 for binning HICAS. You don't have as much of a weight saving in the R33's but I hate HICAS and removing it gave me more confidence in the abilities of the car as opposed to not being entirely sure what the back end was going to do..

Fortunately, my Stagea came from the factory without it :)

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
The sensor is a big white looking disc thing with two posts standing proud of it... really hard to miss.. as soon as you take the boss off there it is.

But +1 for binning HICAS. You don't have as much of a weight saving in the R33's but I hate HICAS and removing it gave me more confidence in the abilities of the car as opposed to not being entirely sure what the back end was going to do..

Fortunately, my Stagea came from the factory without it :)

ok an how is the disc supposed to sit? or am i just making sure its in there?

also, while where on the topic, how hard is it to bin the hicus? is it as simple as unbolting and unpluggin the wires and putting in the bar? or will i need to screw around with the wireing etc, and will i need a wheel alignment? how hard is it? whats involved?

Trozzle Grand Master

Trozzle

Posted
Posted

Mine did this. Would always come on just outside of Sydney on the way back to Canberra, but never any other time....inclusive of the way TO Sydney :S

I personally just pissed it off with a lock bar when I got my suspension etc done, but that's obviously not fixing the problem (unless of course you agree that HICAS itself is the problem in the first place)

nisskid Grand Master

nisskid

Posted
Posted
His is an R33.. I know the 32 will light up the HICAS light if the fluid level is low but doubt the R33 does the same..

yeh i thought it still did as it simply doubled as a hicas/steering fluid warning. im probably wrong, i dont like to meddle in r33 things usually lol

do r33's have a separate warning light for the steering fluid sensor?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Pac
      2020 Nissan Skyline 400R V37/Infiniti Q50 RS insurance in NSW

      By Pac · Posted

      Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Tekitsune
      Upgrade an rb25neo

      By Tekitsune · Posted

      Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • DatsunBanana
      Rear subframe stay bracket bolt removal issues

      By DatsunBanana · Posted

      Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • Dose Pipe Sutututu
      Question about BoV on RB25DET NEO

      By Dose Pipe Sutututu · Posted

      BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • Yeetus
      Question about BoV on RB25DET NEO

      By Yeetus · Posted

      I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
×
×
  • Create New...