Jump to content
SAU Community

Recommended Posts

So, I've got an R32 GTR and it's playing up a little in the colder weather. I thought it was tune related as there was a cold start problem, but Trent has given it more fuel and that problem has gone now. Essentailly the residual problem is now whilst the engine is cold and under light throttle it seems to miss or hestitate a little.....It might be 4th gear 60km/h even throttle. Always sorts its self out once warmed up. No problems under power.

Now it has new plugs, new coilpacks, -7s, Nistune and as Trent had it hooked up to the computer only late last week I'll assume all is well with the tune side of things. The engine is healthy as a recent compression test showed 165 across all cylinders.

Any thoughts as to what may be causing this?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/
Share on other sites

could be the ECU pulling fuel out in closed loop and there is a cell thats not quite inline with the others and its a little lean, mine was doing this before, leans out going through/sitting on a particular cell and the ecu isnt fast enough to add fuel back in on closed loop and it splutters a bit as though its missing. once warm and out of warm up enrichment the problem went away.

does it always happen at the same revs with similar load?

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5347848
Share on other sites

could be the ECU pulling fuel out in closed loop and there is a cell thats not quite inline with the others and its a little lean, mine was doing this before, leans out going through/sitting on a particular cell and the ecu isnt fast enough to add fuel back in on closed loop and it splutters a bit as though its missing. once warm and out of warm up enrichment the problem went away.

does it always happen at the same revs with similar load?

It's not that precise in terms of how it happens. Since the cold start issue has been resolved it starts nicely / normally and idles fine. Its after you've pulled away and given it a couple of gears and even out to a cruise that it starts. Yesterday was the worst it's been. I was driving home from work and it was about 10 degrees ambient. I have a short drive from my car spot to a set of lights and at the lights it nearly stalled. Idle was unhappy. Got going and it did it's stuttering thing until the temp gauge started to register. All was good from there.

So you're thinking it's tune related and not mechanical by the sounds of things.

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5347919
Share on other sites

Could that be why my heater doesn't run full hot? I think you posted in my thread about that too.....

Different issue, the coolant temp switch is responsible for reporting the coolant temp to the ECU, if faulty it might be reporting the engine is fully warmed up when it isn't

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5349381
Share on other sites

^ yeah it will be in the cold start tune. o2 feedback is only used when at running temp

mine was tuned at UniGroup by Yavuz and he confirmed car is left on dyno overnight so he can tune for cold start the next morning, anyways, he will look at it for me soon and will report back what the issue was

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5349662
Share on other sites

mine was tuned at UniGroup by Yavuz and he confirmed car is left on dyno overnight so he can tune for cold start the next morning, anyways, he will look at it for me soon and will report back what the issue was

Well, mine was left overnight too. Twas 4 degrees and it was looked at stone cold, first thing in the morn.

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5349767
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...