Jump to content
SAU Community

Recommended Posts

comparing stock wrx's...

i dont believe the boxer engine is inherently torquey, it all has to do with turbo size i reckon. lag between wrx models are largely dependent upon which model wrx you're talking about.

from 1993 to 1996 inclusive: wrx's were released with the td05 turbo's, and supposedly each year between had a slight variation of td05 to the other (just to make it more confusing). the 94 supposedly the laggiest the 96, the fastest spooling.

from 1997 through to 2000 inclusive: the wrx sported a td04 turbo. even smaller than the td05 but faster spooling units.

yes, my skyline feels quicker up top to my old wrx, but i think this is mainly due to the 6cylinders and larger block this is also not say modified wrx's have no top end!

lol

I think the porsch engines...though boxer units are a more refined breed then the subarus :) You pay for what you get I suppose.

When I ran a friend's MY00, he always pulled faster in 1st gear up to 50-60...then I'd slowly catchup. I wouldn't play with an MY03 though. SO wrxs...don't have much top end then..mmmm...rev it too much and it blows a head gasket? That true? For the MY9X models at least?

How modified is your car though ait? If yours is an fairly stock RB20.. then the superior boxer engine would be fair bit faster.. however the RB25DET is more torquey down low and gives them a much better run. This has been covered a million times on here though :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...