Jump to content
SAU Community

Recommended Posts

HKS mushroom pod filter with rubber adapter. $50 (new conditon minus filter element)

Front mount intercooler kit to suit 33gtst $300 (comes with extra silicon joiners, good condition)

Fuel cut defender $80 (new condition)

remapped standard ecu (s2 r33 gtst) $200 (good condition)

JJR stainless inch front dump pipe $100 (minimal use, couple of track days, good condition)

Turbosmart V port blow off valve $100 (good condition)

2x 33gtst stock rims w tires $80 (painted black)

BMC super touring pod filter $30 (900kms use , good condition, huge surface area)

washer bottle r33gtst $10 (good condition)

air con pump r33gtst $30 (works fine, 90 xxx km)

rear hicas unit r33gtst GIVE AWAY (works fine)

air flow meter r33 gtst $50 (cleaned regularly since ive owned car. good condition)

need it gone guys. rb30det project needs more funding lol

Edited by tm_r33
Link to comment
https://www.sau.com.au/forums/topic/329350-for-sale-many-parts/
Share on other sites

Will get a pic up tomoz. Hobart tasmania. Was hoping for local pick mostly

might have to ask my friend very nicely to pick some bits up (got some brakes to get too and i think they are down there)

which dump is it from the justjap site? there are a few different ones

lol i cant seem to find an edit button to update my first post in this thread. I would likme to remove the parts that are sold and add many more parts. Why cant i see edit button ???

you can only edit your post within about 3 hours of posting it for some reason

do you have the gaskets to go with the dump pipe too?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...