Jump to content
SAU Community

Recommended Posts

Any importers or knowledgeable people out there know the average, or just a rough idea of the, price premium a V-spec II has over a basic GTR (34 GTR) when importing, assuming all things equal, say grade 4 stocker and just for shits and giggles perhaps Nur price diff aswell ?

or is it too varied to bother putting a number down ?

Link to comment
https://www.sau.com.au/forums/topic/329582-r34-gtr-v-spec-ii-premium/
Share on other sites

Price to import vspec II will most likely yield over 65-80k landed and complied. All depends on condition. In regards to the nur, mine was almost 90k landed and complied 4.5 grade (only cause of the k's). Now I'm not sure if colour has to do with anything fetching higher price but I find that pirvate sales here will be cheaper than importing (the yen is tough) but I reckon importing is for finding a top quality car if you do the research.

I'm sure the import guru's here can give you the best advice. This is just from my experience.

thanks mate. Yeh the reason I'm asking is looking around at private sales a V-spec II is only around the 55-60k mark (obviously there are some more expensive ones out there too) and a plain GTR is around 45-55k so not a HUGE difference, but I was under impression importing a V-spec II would be around the 70k mark so just wanted to clarify :)

thanks again

Price to import vspec II will most likely yield over 65-80k landed and complied. All depends on condition. In regards to the nur, mine was almost 90k landed and complied 4.5 grade (only cause of the k's). Now I'm not sure if colour has to do with anything fetching higher price but I find that pirvate sales here will be cheaper than importing (the yen is tough) but I reckon importing is for finding a top quality car if you do the research.

I'm sure the import guru's here can give you the best advice. This is just from my experience.

perfect advice. with the way things are right now with the aud and with the current car market and the japanese market you would only really import a GTR to be able to chose from the largest pool of cars and have a chance at finding a really special or rare car or just one in fantastic condition. but if you want a average condition R34 GTR at a bargain price then you should probably be shopping locally and haggle with local sellers. It holds even more so for R32 and R33 GTRs but still applies to R34s in my eyes.

cheers baron, tbh I would rather a VERY clean stocker than a cheap already modified car. But will look around a bit more and see what the potential difference is.

I want something as close to stock as possible, dont mind intake/exhaust and rims and stuff, but nothing thats really modified, built engine, big turbos or anything like that

Also I'm specifically after a white V-spec II, so I figured importing would have a larger pool to fish from

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...