Jump to content
SAU Community

Recommended Posts

hey everyone i just recently purchased a series 2 blue r33 and as one of its first upgrades i want to buy a cooler, as i live in canberra a local sale would be amazing but im not afraid to travel. ive been keeping an eye on the forsale section daily but have failed to come accross anything so i thought posting in here might help. so if anone have a spare cooler one there not using and wants to sell it hook me up or if theres somewhere i can go in canberra or the like who sell them fairly cheap as my wallet felt the purchase... hahaha

Cheers Jason

PS also looking for a full exaust pref or a cat back if anyone have anything aftermarket in very keen

Link to comment
https://www.sau.com.au/forums/topic/329591-r33-intercooler/
Share on other sites

Have full exhaust and FMIC!

The FMIC is the one that goes up over the radiator and NOT return flow. The exhaust is a large 3" into 3.5" cannon. Sounds tuff as! I also have a dump pipe to suit too, the cat converter isn't much of a cat i don't think, i think it is a bit hollow.

Link to comment
https://www.sau.com.au/forums/topic/329591-r33-intercooler/#findComment-5355510
Share on other sites

Hey mate extremely keen on both, currently traveling to Sydney for a business meeting and will be back later tonight. Is it a full exhaust? If so does the dump suit the stock turbo? Is the cooler direct fit as in I don't need to chop up anything, this doesn't really both me just wondering if Ivan away with being lazy haha. I'd love to come see them sometime tomoz if your free failing that when ur free.

Cheers for the fast replys guys I'm glad there's so much help in Canberra

Jason

Link to comment
https://www.sau.com.au/forums/topic/329591-r33-intercooler/#findComment-5356339
Share on other sites

Hi Jason,

The FMIC will need body modification as the return pipe will have to go through a hole in the side that you need to cut. You MAY need to trim the front bar. I had it installed by Natrad, so not sure of all the details that were involved in getting it to fit completely.

The exhaust will fit the stock turbo, yes. You will need an exhaust bung though as I had my wideband tapped into the dump as well as the stock o2 sensor (easily picked up from an exhaust shop). As said before though, the cat converter is an unknown quantity at this stage, it may be intact, it may be hollowed out thanks to a Bee-R Rev Limiter :(

After $450 for the lot (pretty much a free FMIC since the exhaust is $900+ new)

As for being home tomorrow, it will be the rarest time I'm actually not! PM us your mobile and i'll message you with details etc if you are interested still.

Cheers

Sam

Link to comment
https://www.sau.com.au/forums/topic/329591-r33-intercooler/#findComment-5356557
Share on other sites

the photos better be framed......by 2 hot lesbian vampires

theres a movie called Zombie Strippers with Jenna Jameson in it, even with full on nudity, worst movie ever.

ever.

ever, ever.

forever ever.

random post, meh.

Link to comment
https://www.sau.com.au/forums/topic/329591-r33-intercooler/#findComment-5362580
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...