Jump to content
SAU Community

Recommended Posts

26 views no replies. I'm not sure how to take that. Surely someone has or has heard of Stillen.

Everybody has heard of Stillen, I just assume nobody has an opinion on that piece.

I have used a willall midpipe and catback and now a custom 4 inch with a magnaflow muffler. I have heard of guys on this forum using willall, hks, challenge and Greddy. Maybe there are others but I have not heard of anyone using the stillen system. Most people know of stillen but it isn't exactly the first choice of many people outside the USA. If you want feedback on the stillen product, try the NAGTROC.org forum

Why the stillen system over the many others?

I have used a willall midpipe and catback and now a custom 4 inch with a magnaflow muffler. I have heard of guys on this forum using willall, hks, challenge and Greddy. Maybe there are others but I have not heard of anyone using the stillen system. Most people know of stillen but it isn't exactly the first choice of many people outside the USA. If you want feedback on the stillen product, try the NAGTROC.org forum

Why the stillen system over the many others?

Stillen was recommended by a bloke from Tassie who was at the drive day. I did some research and decided Stillen was the go. (Thats why i was after comments from anyone else that may have used Stillen).

Anyway I have bitten the bullet now. Stillen pipes on the way via Fed Ex. Should have by end of week and installed by weekend. I will post before and after vids if I can work out how too.

Stillen was recommended by a bloke from Tassie who was at the drive day. I did some research and decided Stillen was the go. (Thats why i was after comments from anyone else that may have used Stillen).

Anyway I have bitten the bullet now. Stillen pipes on the way via Fed Ex. Should have by end of week and installed by weekend. I will post before and after vids if I can work out how too.

upload video to youtube then paste linky in here, done. :(

Done. Sounds friggin awesome. Particularly under load and change down. Havn't had a chance to really punt it yet so not sure if any noticable addition to grunt.

Will try and organise vid over weekend.

Good to see you are enjoying your new midpipe! Does it drone at highway speeds at all?

Slight drone at low throttle under load but very bearable. Drone dissipates as revs increase and completely non audible on decel.

Sounds bloody awsome on start up (particularly when cold) and settles into a nice burble on steady idle. But oh the sound under heavy acceleration (gives me a chubby just thinking about it).

Will post a vid in the next couple of days (have recorded it...just need to work out how to load on pc, edit and upload).

  • 1 month later...
Stillen was recommended by a bloke from Tassie who was at the drive day. I did some research and decided Stillen was the go. (Thats why i was after comments from anyone else that may have used Stillen).

Anyway I have bitten the bullet now. Stillen pipes on the way via Fed Ex. Should have by end of week and installed by weekend. I will post before and after vids if I can work out how too.

Where did you order the Stillen from if you don't mind me asking ? What was cost including freight ?

Matt

Where did you order the Stillen from if you don't mind me asking ? What was cost including freight ?

Matt

Ordered direct from Stillen in the states (through there website). All up including freight for exhaust and midpipe was about $3,500 aus dollars but i think Stillen has dropped there price since. Speak to Sean (see his reply above in this post) if you are interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...