Jump to content
SAU Community

Using Test Light

SDUCTV33

By SDUCTV33,
in Car Audio & Electrical

 Share

Recommended Posts

08yannch Rising Star

08yannch

Posted
Posted

i vote get a experienced alarm fitter to do the job for u. from the sound of ur post ur just going to be wasting ur time trying to fit it.

and nobody here will be able to help u to set it up because of the risk a thief well see.

but any way a testlight is a wast of money and time. all it shows is if there is power or not. what u need is a good multi-meter +$15 and install instructions and wiring diagrams i dont think u will find any.

but i still stand by my first statement. get a experienced alarm fitter.

Carbon 34 Grand Master

Carbon 34

Posted
Posted (edited)
test light + yellow harness = fun :laugh:

multimeter my friend OR get your wallet out and pay someone.

I worked in a high end shop in USA and one of the other seasoned installer's torched a ECU for a 959 Porsche with 0 miles on it, funny enough it controlled everything and cost a boat load to replace.all from the use of a 2 buck "test light" to try to interface with a after market alarm...... lets say he didn't get a paycheck for a month to cover it.

Edited by sapphiregraphics
cavell Enthusiast

cavell

Posted
Posted

lol, nuthing wrong with a $10 test light if you know what your doing and how to use it without causing damage, but if he doesnt even know how to use a testlight dont think he should be installing an alarm. like everyone else suggested, for out some cash get a pro to fit it or someone like me who use to fit them and knows what i am doing.

Carbon 34 Grand Master

Carbon 34

Posted
Posted (edited)
two words troy - FLUKE 78. (or a DSO depending on what I am chasing.)

wanna see my fluke.. 87 if you want a laugh its in pieces on my table,,,,the LCD plugs and IC driver got salt water corrosion from a downpour of rain a few drops must have entered the case thru the LCD area. when my R31 broke down in the dark I had to sort the lights out in the rain, some previous owner had hacked the wires behind the battery for some fog lights and used 3 different pieces of wires to extend the circuit off the relays. dickhead..lol

but good old Fluke, a little toothbrush and baking soda scrub off and circuit board cleaner, works good again, now to fix the light on it...grrrrr

I've had this thing since it came out, dropped a million times, nothing beats a FLUKE, but on my current budget I bought a jaycar top of the line one to measure High current thru a clamp rather then shunt 300amps

Fluke 87 cost a boat load in OZ, and someone stole my 78 off the workbench when I worked in Denver

Fluke is backup now. till light is fixed.

Nothing wrong with some cheaper ones, some even test transistors and diodes by simple plug in. great for circuit level board work. I have a few cheapos for that very thing, lol

tools are like porn,,,, you can never have enough..lol kidding on the porn..lol

Edited by sapphiregraphics
Carbon 34 Grand Master

Carbon 34

Posted
Posted
lol, nuthing wrong with a $10 test light if you know what your doing and how to use it without causing damage, but if he doesnt even know how to use a testlight dont think he should be installing an alarm. like everyone else suggested, for out some cash get a pro to fit it or someone like me who use to fit them and knows what i am doing.

a incandescent Test light is fatal to a newer car, LED bulb ones not so bad but still draw too much current for some circuits. like a airbag /ECU ???

and wont tell you if its 5 volts or 13volts on the wire ? both light up the dumb test light

and I don't know how many times a rookie installer uses a dash/dimmer light wire for grounds, cause it shows as a ground on most cars, until you flick on the lights, then positive voltage hits the radio ground. and floats the ground on the radio thru the antenna jack...not a good thing

08yannch Rising Star

08yannch

Posted
Posted
lol, nuthing wrong with a $10 test light if you know what your doing and how to use it without causing damage, but if he doesnt even know how to use a testlight dont think he should be installing an alarm. like everyone else suggested, for out some cash get a pro to fit it or someone like me who use to fit them and knows what i am doing.

i was actually referring to a $10 multimeter sorry for the confusion every one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...