Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm Paul, I've only just registered here. I was hoping to get some thoughts on the following GTR (carsales ad pasted below)

I went and had a look at it today, and it's pretty much everything I'm after, looks very clean and straight, almost stock. The one thing that bothers me is an out of place weld on the drivers side door sill, I just cant make any sense of it, I'll attach a photo I took with my iphone. I'm assuming its a remaining scar from some sort of accident repair, but how significant I dont know. All panel gaps are good, doors close perfectly, there are no signs of the car being bent in any way, so if any of you have any theories, I'd love to hear them!

Also, the current owner is a retired guy in his 60's, has a bunch of cars, an old jag, a few GT cortinas etc, he loves is cars, and I believe he's looked after this one, the repair in question happened before he bought it. Given that most of these cars probably have wound back odometers, what are the things you can check to make sure you're not buying a lemon?

Cheers for any help.

Paul.

http://www.carsales.com.au/all-cars/privat...&__Qpb=true

post-75832-1281187138_thumb.jpg

Edited by Braddock
  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Looks really real nice Paul good find with the weld though I am thinking that the metal may have been torn though not sure how in such a small area it's an interesting one as it's in quite an odd place not usually where u expect to find a repair weld. But just my 2c

Good luck

Edited by Hybrid905

It might be rust.... that car is overpriced anyway, you can pick up a good example for around $17,000

EDIT: I don't get why a 60 year old would treat their car better? A 20 year old (as most skyline owners are in their 20s) would be able to maintain the car as the 60 year old does...

Edited by Game

Hiya Paul & welcome to SAU!

That patch may simply be a rust-repair. I've seen rust there on the driver's side of 2x R32s before.

Values and prices of R32 GT-Rs which have low kms (as best you can determine), have no rust, well maintained and TLC'd can still attract that sort of moolah. Check out everything and leave no stone unturned - despite the guy's age.

After all your checks have been done, take along someone just as old as he is, to haggle on your behalf. We old dudes are called 'grey-power' LOL.

Q Why do people become impressed with old guys' cars?

A When we were kids, we used to space our stamps (in our philately collections) exactly a quarter inch apart (with a ruler) - lol

And we still can't understand why you young'uns play electronic games and try and find cheats/shortcuts - lol

Back to the GT-R, check for rust whilst on a hoist; or better still, pay one of the workshops around town to inspect everything (& I mean everything) for you = $100 well spent!

And if you buy it, your car wants to come to the party below !!!!!!!!!!!!!!!!!!

It might be rust.... that car is overpriced anyway, you can pick up a good example for around $17,000

EDIT: I don't get why a 60 year old would treat their car better? A 20 year old (as most skyline owners are in their 20s) would be able to maintain the car as the 60 year old does...

+1

so many nice R32 for sale in For Sale section and maintained by Skyline enthusiast's

they might not be 60 year olds though :ermm:

but you can get nice one for 15-16K

remember, the simple truth is there are way to many for sale than there are buyers, so just because a Car is worth 21K, does not mean you have to Pay 21K ... it is buyers Market with GTR's

everyone becomes somewhat deperate at some point with these kind of special Cars as there are not many people interested with them...

Look around and you shall find !!!

I have that same 'weld' on my sill. I had my car thoroughly inspected before purchase and I believe it to be a very clean straight car that has not been crashed. I'm not so sure it's that unusual. Could be normal. I'll try and post up a pic of mine.

Hey guys,

Thanks for all the great replies, good to see this is an active forum.

In regards to the guys age, all it means for me is that he's not interested in big HP or racing people at the lights, but its more that he's a car enthusiast and used to working on and maintaining much older, lower horsepower vehicles. Of course a passionate 20 year old enthusiast can maintain the car just as well, but will also generally drive it a bit harder.

It's the almost stock nature of this car that appeals to me, I'm not interested in modding, the standard output is enough for me, I just want a good reliable, untouched r32 that's enjoyable to drive in its original order, I've had a hard time finding one, including those in the classifieds here that don't at least have pod filters.

You all seem to agree the car is overpriced which is a great bit of feedback, I'm not attached to the car, so I could offer him $17,500 and happily walk away if he's not interested, as you say, its a buyers market, and he's even said he's only had one other phonecall!

In regards to the sill, I need to have a more thorough look for rust, but my first inspection didn't reveal any, not to say there isn't some hiding somewhere though.

I think the best thing to do is organise an inspection via state roads and go from there.

LotusGTR, I'd be very keen to see a pic of that sill!

Also, a few people have mentioned owning an r32 GTR can be expensive... can anyone tell me what a major service might cost?

Thanks everyone.

Thanks mate, that's really interesting, the weld is obviously suposed to be there, but yours are cleaner and less bumpy than the one I looked at, so not sure what that means exactly, but I'm a little less suspicious of it now.

Cheers for that.

Here are the pics of the sills on both my R32 GTRs. My GTRs are immaculate. Hope this helps. Full pic of the red one for the sake of judging condition.

Put her up on the hoist to check out that sill.

The Sikaflex is not quite as it should be, and the weld (although very neat) hasn't been sanded flush like in other photos.

Rear sills are a great rust spot on 32's, so many holes for the skirts.

The Skyline entry trim is dead easy to pop out and with a light, you'll see into the sill through the trim mounting holes.

post-73571-1281244275_thumb.jpg

Hi.

I think i may know trhe owner of this car. Seeing that you have met him you may know his full name. If you have and know this the first letters on the number plate will confirm it is who i am sure it is. The car i have some familiarity with is dark blue. Dont be concered he has some toys and i assume you inspected it at an industrial complex. If this is the case you would be buying a very good car. My car has never been accident damaged and has the same seam sealer. If you are interested and see him again tell him " Terry the Lotus Cortina man passes on his regards"

Thanks Jiffo, and cheers for your PM btw, I can't reply yet as I haven't made enough posts.

Put her up on the hoist to check out that sill.

The Sikaflex is not quite as it should be, and the weld (although very neat) hasn't been sanded flush like in other photos.

Rear sills are a great rust spot on 32's, so many holes for the skirts.

The Skyline entry trim is dead easy to pop out and with a light, you'll see into the sill through the trim mounting holes.

Yep, that's the first thing I noticed, and have since seen it in quite a few others as well. Must be a common thing with the R32

Also this may not be a big issue but you can see the dash is bubbled which is a very common thing with such an old car. Besides that, the car looks great.

Hi Terry, yes his name is Garry and yes the car is dark blue / gun metal grey

I'm sure Garry is genuine, its the cars history before he owned it that concerns me, as would be the case with all imports. The car has no log books etc.

That weld seam still has me worried, it's definitely been re-welded at some point as the finish doesn't look like others I've seen.

I made him an offer of $17,500 pending a satisfactory inspection, which is well below what he's asking, and he's declined, so I have to think about it some more.

Cheers,

Paul.

Hi.

I think i may know trhe owner of this car. Seeing that you have met him you may know his full name. If you have and know this the first letters on the number plate will confirm it is who i am sure it is. The car i have some familiarity with is dark blue. Dont be concered he has some toys and i assume you inspected it at an industrial complex. If this is the case you would be buying a very good car. My car has never been accident damaged and has the same seam sealer. If you are interested and see him again tell him " Terry the Lotus Cortina man passes on his regards"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...