Jump to content
SAU Community

Recommended Posts

That's what i like to hear! the bit about it feeling special I mean.

This is a learning curve for me, I dont even own a toolbox, or have my own garage. so that might give you an idea of how often I work on cars.

Pardon me for being ignorant, but if a turbo fails, does it destroy the whole engine with it? whats the worse case scenario regarding turbo failure?

Mine had stock turbos when I bought it, and ran upto 20psi for a year (very sure they were not stock..) the front one blew, so pulled them out and stuck some N1s in there, also know of an R32 that has done Targa Tas about 9-10 times now running ceramic turbos, and has not had 1 turbo failure. My suggestion would be if you like working on cars, and are happy to have it off the road a bit, (and spend some money) then push the limit a bit, try to do the work first though (be it Turbos, or even an R33 motor etc). If you are not wanting to do this sort of work, do not run over 10-12psi, and keep plenty of oil in it (1/2-3/4 litre over full) and you will have a reliable (if thirsty) and very fun road car. After 1 year my car still feels special every time I drive it, and I love it.
  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I have 2 of the same car. I love both. I drive my wife's car over the weekend and then the GTR on Monday and it is heaven. Worst case you will lose an engine. $10k bill for a proper fix.

Turbo's shouldnt fail at 14psi or under.

I can't see a reason they would unless its been thrashed to hell, which I doubt would be the case.... (with this car anyway)

If its stock, check for the boost restrictor. My 33 still had it in there, 14 years down the track. Taking it out = 14psi. (Was in place to help make it "276hp")

Edited by Ten Four

I've gotta say, I couldn't have found a more helpful forum, really appreciate the feedback and answers to my many questions from you all!

There's still a chance I may pull the pin on the whole idea and wait a bit longer, but it's been an interesting few days learning the ins and outs

of buying a GTR.

Thanks guys.

You might be right about that. As far as I can tell

though, the only difference is Brembo breaks, BBS wheels, a sticker on the

back, and an updated 4x4 system? I think they're also a tad heavier?

Haha, I'd go that VspecII if the Vin and car checks out.

Value will only go up :)

Yeah, Brembo's, BBS, sticker, different diff, R33 GTR 4wd system (its much quicker to shift torque to front wheels).

Some said steel compressor wheels in the turbos? I'm not sure on this though.

Plus, only about 1300 VspecIIs ever made.

Ok guys,

I've decided to not go ahead with either of these cars for now. Thank you all for your input, I probably would have made a huge mistake

if not for this forum.

The dream is not over! but I need more time to look and research, its foolish of me to think I can find an original car that wont need money spent

on it, so I hear what you're all saying about the pros of buying an already modified car, its just a matter of finding one that's been modified in all the

right areas with an emphasis on durability and reliability - for me anyway.

Cheers,

Paul.

V-Spec II = Base model R32 GTR, but with:

Brembo Calipers.

Revised ATTESA E-TS system.

17" BBS wheels with 245/45/17 tires.

Weight about 50kgs more.

Standard Ceramic Turbo's as only the R32 GTR N1's came with N1 Turbo's = Steel Wheels.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...