Jump to content
SAU Community

Recommended Posts

I will make a list of parts and will be adding prices and pics when I can. Any reasonable offer will be considered.

Jun Intake Manfold - $800

550cc SARD Injectors - $500- Done about 10000km

Custom Fuel Rail - $150

Garrett T2876R Turbo - $700

Custom Exhaust Manifold - $800 - 3.2mm thick steampipe, was on Fineline's old 25 so you know its good for plenty of power

52mm Alloy 2 Core Radiator - $200

Microtech LT12X ECU with Bosch Ignition Pack and Hand Controller - $800

Cusco Front Strut Brace - $150

Nissan Rear Strut Brace - $100

Oil Cooler Kit with Filter Relocator - $200

R33 Gearbox - Make an Offer

Nismo Short Shifter - $130

SAAS Enforcer Bucket Seat - $200

RPM Racing Harness - $100

Adjustable Castor Rods - $100

ADR Approved Braided Brake Lines - $200

Cusco Brake Cylinder Brace - $75

Malpassi Fuel Reg - Make an offer

Starcorp Racing Mags - $1200 - New front tyres, 30% left on rear.

Rear Adj Camber Arms - $75

HICAS Lock Bar - $60

Vented Carbon Fibre Bonnet - $450 - Comes with Aero Locking Latches and Pins

R33 Throttle Body - $75

Still lots of Parts to come. If you need something just PM me and I will see if I have it.

Link to comment
https://www.sau.com.au/forums/topic/332578-tjr33-part-out/
Share on other sites

Jun Intake Manfold - $800

550cc SARD Injectors - $500- Done about 10000km

Custom Fuel Rail - $150

Garrett T2876R Turbo - $700

Custom Exhaust Manifold - $800 - 3.2mm thick steampipe, was on Fineline's old 25 so you know its good for plenty of power

52mm Alloy 2 Core Radiator - $200

Microtech LT12X ECU with Bosch Ignition Pack and Hand Controller - $800

Cusco Front Strut Brace - $150

CuscoStrutBrace.jpg

Nissan Rear Strut Brace - $100

Oil Cooler Kit with Filter Relocator - $200

OilFilterRelocator.jpg

OilCooler.jpg

R33 Gearbox - Make an Offer

Nismo Short Shifter - $130

SAAS Enforcer Bucket Seat - $200

SAASEnforcerSeat.jpg

RPM Racing Harness - $100

ADR Approved Braided Brake Lines - $200

Cusco Brake Cylinder Brace - $75

Malpassi Fuel Reg - Make an offer

Starcorp Racing Mags - $1200 - New front tyres, 30% left on rear.

Rear Adj Camber Arms - $75

HICAS Lock Bar - $60

Vented Carbon Fibre Bonnet - $450 - Comes with Aero Locking Latches and Pins

R33 Throttle Body - $75

BC Racing Coilovers, Height and damper adjustable. Front and Rear.

FrontCoilovers.jpg

Still lots of Parts to come. If you need something just PM me and I will see if I have it.

Link to comment
https://www.sau.com.au/forums/topic/332578-tjr33-part-out/#findComment-5400112
Share on other sites

hey man how much are u selling the front coilovers for? and how many kilometers do they have on them? would you say there suitable for street because I've currently got teins on my car and there way too stiff for me.

Link to comment
https://www.sau.com.au/forums/topic/332578-tjr33-part-out/#findComment-5410080
Share on other sites

hey man how much are u selling the front coilovers for? and how many kilometers do they have on them? would you say there suitable for street because I've currently got teins on my car and there way too stiff for me.

They seemed fine on the street to me, They are all adjustable so you can soften them up to make them more comfortable.

Im selling the coilovers as a set and Im looking for $800 and they have about 15000km on them.

Link to comment
https://www.sau.com.au/forums/topic/332578-tjr33-part-out/#findComment-5410085
Share on other sites

hey bud,interested in castor rod bushes and do you have interior panals?

i can drop by to have a look

Castor rods are sold mate but I have all interior panels at the moments.

Link to comment
https://www.sau.com.au/forums/topic/332578-tjr33-part-out/#findComment-5423651
Share on other sites



  • Similar Content

  • Latest Posts

    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
×
×
  • Create New...