Jump to content
SAU Community

Recommended Posts

(N.S.W) DYNO DAY at incar racing 4/9/10

Hi guys

Holding a dyno day at incar racing they are a friendly team will advice and assistance you in the direction you want to go with your car.

So come join us on this day.

When: 4/9/10

Where: incar racing

1/2 Verrell Street

Wetherill Park

Time: 9am till cars are all done, so get in early.

Dyno type: Dyno Dynamics

Car type: FWD,RWD

Cost: will be $50 for 2 runs, plus drink and breakfast

http://www.incarracing.com.au/index....d=6&Ite mid=1

Link to comment
https://www.sau.com.au/forums/topic/332984-nsw-dyno-day-at-incar-racing-4910/
Share on other sites

  • 3 weeks later...

Hi Guys,

Mate of mine is hosting a dyno day this weekend at Incar Racing at Wetherill park so whether you want a shot at the Highest HP run of or just keen to see what power your machine is making, this will be the ultimate opportunity to make it happen. The Guys at Incar racing are friendly and professional and will be on site to assist you with any technical advice you may have on the day.

Equipment: Dyno Dynamics RWD/FWD

Where: Incar racing - 1/2 Verrell Street Wetherill Park

When: Starts at 9.00am, Saturday 4th of September.

Cost: $50 per car x 2 Runs with certified Dyno print out. (payments to be made on the day and or booked directly through Incar racing)

Food and drinks will also be provided, as you can imagine placings will be limited so get in fast.

for more information please visit

http://www.incarracing.com.au/index.php?op...=6&Itemid=1

i apologize for the short notice ive been trying to post this for a while but keep getting IPS driver error if mods could delete my previous 2 attempts id appreciate it.

Edited by Hiroshima Screamer


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...