Jump to content
SAU Community

Recommended Posts

Hi guys,

Just seeing if anyone has some tips or techniques on how to remove the Japanese TV brackets off dashboards.

I know they can leave your dash a mess so is there a way to take them off leaving little to no evidence they were ever there?

Here's a pic if you’re not sure what I'm talking about.

post-4435-1282014708_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/333258-removing-japanese-tv-dash-brackets/
Share on other sites

i guess it depends how hardcore the installer went when they put it in. does it just have an adhesive securing it to the dash or does it have bolts going through the dash and secured by nuts on the other side? if its the latter then you cant do too much about holes it'll leave behind.. perhaps an upholstery specialist might have a suitable filler to use. also if this is the case then i think the whole upper dash will have to come out so you can get at the other side to loosen the nuts

if your lucky and its just an adhesive, then the dash wouldn't have to come out, but you will have to loosen it off very gradually and carefully or you might pull up bits of the dash surface and it will look horrid afterwards. for an adhesive get some wd40 or crc 5.56 or a versatile citrus cleaner and squirt it in around it and after a minute or two it should start to break up the adhesive, allowing you to lift it up bit by bit and just keep squirting more as it comes off. concentrate on one edge as it comes up and just work your way to the other. dont pull too hard on it or you'll risk ripping up the upholstery surface, let the spray do the work for you and you just lift it off as it becomes free

Edited by jonboy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
    • Run some injector cleaner through it I had a similar issue that plagued me for months, even tried replacing the cat. If one or more injectors are blocked up the ecu sees ping so pulls timing and makes the tune rich overall, you'll see black smoke coming out of the exhaust and like me assume it's running rich but it could only be one or two cylinders  $10 bottle of injector cleaner and the next time I hit boost it pumped out a huge plume of black smoke, cleared the blockage and then ran great, if that's not the issue it's only a cheap thing to try haha  
×
×
  • Create New...