Jump to content
SAU Community

Recommended Posts

Wrecking whole front end of an R32, all components except the long engine for sale, post here with what you're after.

Aftermarket Stuff:

R32:

3 .3 - 3.75" Cat-Back Exhaust: $400

Front Strut Brace: $100

Rear Strut Brace: $100

Carbon Fibre Vented bonnet: $500

Bride Drivers side seat rail (same as most other aftermarket rails): $150

Sparco Drivers side seat rail (same as most other aftermarket rails): $150

Mechanical 1.5 way LSD + housing and half shafts: $950

N1 Headlight (driver's side): $200

Universal (for any car):

2.5" Decat Pipe (S/S): $70

Nismo Gear knob: $50

Short-shifter: $150

Sparco Rev Fixed Back Bucket seat (average condition, has tears etc) $200

R32/R33/A31 Bride Drivers side seat rail (same as most other aftermarket rails): $150

R32/R33/A31 Sparco Drivers side seat rail (same as most other aftermarket rails): $150

3-Point Harness: $50

MOMO "Race" Steering wheel with Nissan Boss kit: $200

GReddy SM Integration Guages + sensors + control unit (water temp, oil temp, oil pressure): $450

3-Layer Copper Radiator: $300

AVS Model 6, 17x9 +36 (pair): $400

Lightweight Jap Wheels (17x8.5 +35): $250

BBS RS 17x9 +20: $1000

Work Meister 18x9/10: $2950

Stock Parts

R32 GTS(t):

Suspension/Steering

2x Front Sway Bar - $50ea

2x Front Complete upper control arm assembly's including bracket and king pin bearing - $100ea -- PICS PICS

2x Front Camber Arms - $40ea -- PICS

2x Front Passenger side Lower Control Arm - $60 -- PICS

2x Front Complete Hub and Brake Assemblys including everything: $280ea

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Lower Control Arms - $60ea -- PICS

2x Rear sway bar links w/ Urethane bushes - $15ea -- PICS

2x Rear Hubs - $100ea -- PICS PICS

2x Rear Complete Hub/Brake Assembly's including everything - $170ea

1x Rear Sway Bar - $50ea

1x Rear Subframe - $100

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

2x Rear Toe Rods (hicas) - $50ea

Misc:

2x R32 2dr - Doors - Silver - $300ea

2x R32 Gearbox - $500

2x Indicators: $50ea

1x Horn, can be hooked up to any car - $20 -- PICS

2x Stock Clutches, 1 half warn, one fair bit more warn - $30 and $70

1x Stock Rear Spoiler (with brake light) - $50 -- PICS

3x RB20 Coilpacks - $30ea

1x Turbo Timer, very basic timer, manual set - $20

1x RB20 Fuel Pump - $40 -- PICS

1x Igniter Module (breaks down under a lot of heat) - $30 -- PICS

R32 GTR:

2x R32 2dr - Doors - Silver - $300ea

Passenger Side seat with rails: $250

Front Grill: $150

GTR fuel pump

R33:

Standard VLSD with housing and Half shafts: $300

R33 Lower Control Arms - $200pr

S13:

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

Located in SA near Mitcham, can Post Anywhere

Link to comment
https://www.sau.com.au/forums/topic/333389-the-get-me-back-to-japan-sale/
Share on other sites

I'd love to buy 2 of them BBS wheels for skid rims haha

BLASPHEMY

BBS RS's are a cult wheel as well as being wheel pornography, not skidders, clean ur mouth out with soap! :P

  • 2 weeks later...
Quick Q. Nisskid.

How long are the rear traction arms you have? Two holes in them across the bridge, and are they the same length as the ones that come off the wishbone?

they are standard arms man, stock length. i can get that for u if needed.

I only ask as I was supplied arms from Nisswreck with my cradle, but they have given me arms which I believe from the front of the rear wishbone to the hub.. not the traction arms. Just want to check it all out before I re-attach the rear cradle to the car again.. and if i need to get these said arms you have or not.

Sorry for the confusion, Ive just realised I need Toe arms not traction arms!! They've given me the traction arms!EDIT

Edited by Illest
I only ask as I was supplied arms from Nisswreck with my cradle, but they have given me arms which I believe from the front of the rear wishbone to the hub.. not the traction arms. Just want to check it all out before I re-attach the rear cradle to the car again.. and if i need to get these said arms you have or not.

Sorry for the confusion, Ive just realised I need Toe arms not traction arms!! They've given me the traction arms!EDIT

ahk, atm i only have 1 drivers side rear toe arm

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...